Originally Posted by
Fudgey
ive got compbrake compression struts and TCA's on the 3dr, but they are not set up yet. that is next on the list after mapping.
i also have a set of esscentric top mounts, but these are so far unfitted.
can anyone shed any light on what settings to go for?
front only as the rear is stock with poly bushes
Fudgey, is your rear end adjustable?
Fronts, as a base setting, I would go with:
Toe: 2mm total toe out, 1mm each wheel
Camber: 2 degrees Negative on each wheel
Castor: 3'30 (three degrees thirty minutes)
Rear: 2 Degrees Negative
Toe: 1mm Total total, 0.5mm each wheel
Obviously you want minimal axel offset/ thrustline, but a good 4wd laser aligner will show you all that. It's a good base setting for the car, should turn in nice, self centre quite easily and not snap oversteer if you are running a decent rear beam.
