Red RS Turbo S2...Tidy Up !!!!
#1
Advanced PassionFord User
Thread Starter
Join Date: Dec 2006
Location: Crewe
Posts: 1,521
Likes: 0
Received 0 Likes
on
0 Posts
Red RS Turbo S2...Tidy Up !!!!
Right seeing how the bufty king (martin redrsmk5) has been down to my house to have alook at my RS, he started to help me restore the faded red bumpers, engine bay and anything else that needed doing. So once he started i couldnt finish !!!!!
The car looked like this when i bought it on fri...
It looks ok from there but the bumpers have gone slightly pink..
Not a good pic but you get the jist.
Anyway i started on the engine bay first....
Passenger suspension turret
And after abit of elbow grease to the left side.
Also polished the top of the wing and cleaned the bonnet rubber up.
Drivers side turret, wing top and rubber
Slam panel had abit of a polish (stickers were on, but removed to clean the panel)
I then had a quick clean behind the drivers door and wing.
More pics tomorrow as im off work so i will get a full day on it..........
The car looked like this when i bought it on fri...
It looks ok from there but the bumpers have gone slightly pink..
Not a good pic but you get the jist.
Anyway i started on the engine bay first....
Passenger suspension turret
And after abit of elbow grease to the left side.
Also polished the top of the wing and cleaned the bonnet rubber up.
Drivers side turret, wing top and rubber
Slam panel had abit of a polish (stickers were on, but removed to clean the panel)
I then had a quick clean behind the drivers door and wing.
More pics tomorrow as im off work so i will get a full day on it..........
Last edited by MattyRST; 20-06-2008 at 09:40 PM.
#5
Advanced PassionFord User
Thread Starter
Join Date: Dec 2006
Location: Crewe
Posts: 1,521
Likes: 0
Received 0 Likes
on
0 Posts
I decided to start on the outside of the car today, i started at 930am giving the car a wash, i then had to t-cut the car to get rid of the pink paint, then i finished it off with meg's polish, i finished it at 3pm.
Here the pics..
You can see the clouds on the bonnet...
Reflections on the door
Reflections on the rear quarter
There you go, hard work and abit of elbow grease pays off !!!!
Here the pics..
You can see the clouds on the bonnet...
Reflections on the door
Reflections on the rear quarter
There you go, hard work and abit of elbow grease pays off !!!!
Trending Topics
#11
Advanced PassionFord User
Thread Starter
Join Date: Dec 2006
Location: Crewe
Posts: 1,521
Likes: 0
Received 0 Likes
on
0 Posts
#12
Advanced PassionFord User
Looking fab mate what a difference.
#14
Advanced PassionFord User
Thread Starter
Join Date: Dec 2006
Location: Crewe
Posts: 1,521
Likes: 0
Received 0 Likes
on
0 Posts
Looking good mate
Nice set of wheels that suit red S2's perfect
https://passionford.com/forum/showthread.php?t=239559
Nice set of wheels that suit red S2's perfect
https://passionford.com/forum/showthread.php?t=239559
#18
Advanced PassionFord User
Thread Starter
Join Date: Dec 2006
Location: Crewe
Posts: 1,521
Likes: 0
Received 0 Likes
on
0 Posts
#19
Grey Mk4 Early XR3I
ive been after a set of original voodoos for years! bloomin wolfracer dont make em any more and the new ones aint as nice
let me know when u want rid
let me know when u want rid
#23
Advanced PassionFord User
Thread Starter
Join Date: Dec 2006
Location: Crewe
Posts: 1,521
Likes: 0
Received 0 Likes
on
0 Posts
#24
Advanced PassionFord User
Thread Starter
Join Date: Dec 2006
Location: Crewe
Posts: 1,521
Likes: 0
Received 0 Likes
on
0 Posts
Right abit of an update, some bits have arrived....
New surround, that holds boost gauge
New rocker gasket
90 spec front bumper
Opening rear quarters
90 spec rear spoiler
Just waiting on some bolts from ford, so i can fit the rear quarters, the bumper and rear spoiler will be painted asap and i shall fit the surround and boost gauge sometime this week.
New surround, that holds boost gauge
New rocker gasket
90 spec front bumper
Opening rear quarters
90 spec rear spoiler
Just waiting on some bolts from ford, so i can fit the rear quarters, the bumper and rear spoiler will be painted asap and i shall fit the surround and boost gauge sometime this week.
#26
PassionFord Post Whore!!
iTrader: (3)
Join Date: Jun 2003
Location: Maldon, Essex!
Posts: 4,186
Likes: 0
Received 0 Likes
on
0 Posts
Looks good so far mate. Im so jealous of your wolfrace voodoos, i always wanted a set for my red s2 but couldnt find any for love nor money. Ended up getting a set of mondeo 16s now which ive just had refurbed, gonna run them for a bit until i can get some rs 7 softspokes.
#27
Advanced PassionFord User
Thread Starter
Join Date: Dec 2006
Location: Crewe
Posts: 1,521
Likes: 0
Received 0 Likes
on
0 Posts
Looks good so far mate. Im so jealous of your wolfrace voodoos, i always wanted a set for my red s2 but couldnt find any for love nor money. Ended up getting a set of mondeo 16s now which ive just had refurbed, gonna run them for a bit until i can get some rs 7 softspokes.
#28
PassionFord Post Whore!!
iTrader: (3)
Join Date: Jun 2003
Location: Maldon, Essex!
Posts: 4,186
Likes: 0
Received 0 Likes
on
0 Posts
i would offer u a swap for your voodoos but to be honest ive spent so much on my 16s getting them fully refurbished and new tyres that i would be stupid to not get some use out of them lol
#29
Advanced PassionFord User
Thread Starter
Join Date: Dec 2006
Location: Crewe
Posts: 1,521
Likes: 0
Received 0 Likes
on
0 Posts
I have got a mate who has got a set, but i want to shift my voodoo's first and i have a lad interested in buying them.
#30
Advanced PassionFord User
Thread Starter
Join Date: Dec 2006
Location: Crewe
Posts: 1,521
Likes: 0
Received 0 Likes
on
0 Posts
A bit of any update, ive started to clean the rear back box..
other side..
Can anyone tell me what i can use to get rid of the white/cloudy affect on the back box ??
Ive since fitted a set of clear indicators front/side..
And ive also fitted my boost gauge (the cars running 4psi!!!!) and surround..
More updates to come...
other side..
Can anyone tell me what i can use to get rid of the white/cloudy affect on the back box ??
Ive since fitted a set of clear indicators front/side..
And ive also fitted my boost gauge (the cars running 4psi!!!!) and surround..
More updates to come...
#31
Advanced PassionFord User
Thread Starter
Join Date: Dec 2006
Location: Crewe
Posts: 1,521
Likes: 0
Received 0 Likes
on
0 Posts
Abit of an update, i had the cam belt, tensioner and water pump done (i had abit of a leak) yesterday. On monday, martin (redrsmk5) came down to my house and fitted my open rear quarters.....
A big big thank you to Martin, then after looking at ebay for hours i won a set of these which you dont see on many RS's, as everyone has the smoked ones..
So there you go, a couple of bits done but still along way to go........
A big big thank you to Martin, then after looking at ebay for hours i won a set of these which you dont see on many RS's, as everyone has the smoked ones..
So there you go, a couple of bits done but still along way to go........
#34
PassionFord Post Whore!!
iTrader: (3)
Join Date: Jun 2003
Location: Maldon, Essex!
Posts: 4,186
Likes: 0
Received 0 Likes
on
0 Posts
Looks good mate. That cloudy effect on the exhaust, it looks from the pics like overspray, or is it actually in the finish of the back box? I always find stainless exhaust boxes hard to bring back up to a shine when they have been left to go all dirty etc before. I trust your using autosole yeah to help bring the shine back? thats all i can think of suggesting.
#37
Advanced PassionFord User
Thread Starter
Join Date: Dec 2006
Location: Crewe
Posts: 1,521
Likes: 0
Received 0 Likes
on
0 Posts
Looks good mate. That cloudy effect on the exhaust, it looks from the pics like overspray, or is it actually in the finish of the back box? I always find stainless exhaust boxes hard to bring back up to a shine when they have been left to go all dirty etc before. I trust your using autosole yeah to help bring the shine back? thats all i can think of suggesting.
#38
Advanced PassionFord User
Thread Starter
Join Date: Dec 2006
Location: Crewe
Posts: 1,521
Likes: 0
Received 0 Likes
on
0 Posts
Thread
Thread Starter
Forum
Replies
Last Post
Matt Baxter
Ford RS Cosworth Parts for Sale
6
16-09-2015 08:30 PM
muz
General Car Related Discussion.
3
16-08-2015 12:57 PM