project free fiesta (update 19/10) rs turbo breaks on
#1
project free fiesta (update 19/10) rs turbo breaks on
hello every one, im in a similar sort of situation to gaz (1st escort) im young, in full time education and obviously skint. so theplan is to buil this on a minaimal budget, not going mad with it, justy want it to look presentable,
had a brilliant start to the project as i managed to buy the car for £10
now, from that comment it just goes down hill;
its a 5 door
its got the horrib non colour bumpers
itd got the gay purple dash
and its a 1.3 hcs
after those bad pionts the reall problems dont seem to bad,
its got rusty sills, the rear breaks are siesed, the interior is standed, dent in the boot, theres grass growing on it, and the arches are rust, and the lump rattles like fuck.
any way, the plan is to get it road legal and looking presentable (and if funds allow one day to chuck a 1700 cross flow, or a series 3 zetec in , but i doubt this will happen for a long while)
and to make it more interesting, im going to keep a tally of every penny spent
so far is
car purchase- £10
paint for arch £10.39
im hopefully picking up my new welder i the week, and am currently trying to sorce a set or 15's for it (if any bodys got some for sale pm me please )
not going mad with it, was thinking black wheels, black lights all round, mud flaps, lowered and some tints (just dark, nothing fancy) and going to repaint the plastic bumpers jet black and stick a splitter on, then ill turn to the interior, si wing backs, fez turbo sterring wheel (because ive got those two in the garage) and a head unit, disc loader and sub and amp (again, all recycled from in the garage)
like i said at the start, this isnt going to be a tarmac terrorist as ive got the rs for that, just want some thing presentable, and im going to do it as cheap as humanly possible,
hopefully getting some white dial clocks withthe rev counter built in so if ay one knows how to wire these in on the 1.3 id be greatfull for guidance.
also if any one has any parts that they think might be usefull to my project let me no
ill get some pics up when its sunny tommorow
cheers, lee
had a brilliant start to the project as i managed to buy the car for £10
now, from that comment it just goes down hill;
its a 5 door
its got the horrib non colour bumpers
itd got the gay purple dash
and its a 1.3 hcs
after those bad pionts the reall problems dont seem to bad,
its got rusty sills, the rear breaks are siesed, the interior is standed, dent in the boot, theres grass growing on it, and the arches are rust, and the lump rattles like fuck.
any way, the plan is to get it road legal and looking presentable (and if funds allow one day to chuck a 1700 cross flow, or a series 3 zetec in , but i doubt this will happen for a long while)
and to make it more interesting, im going to keep a tally of every penny spent
so far is
car purchase- £10
paint for arch £10.39
im hopefully picking up my new welder i the week, and am currently trying to sorce a set or 15's for it (if any bodys got some for sale pm me please )
not going mad with it, was thinking black wheels, black lights all round, mud flaps, lowered and some tints (just dark, nothing fancy) and going to repaint the plastic bumpers jet black and stick a splitter on, then ill turn to the interior, si wing backs, fez turbo sterring wheel (because ive got those two in the garage) and a head unit, disc loader and sub and amp (again, all recycled from in the garage)
like i said at the start, this isnt going to be a tarmac terrorist as ive got the rs for that, just want some thing presentable, and im going to do it as cheap as humanly possible,
hopefully getting some white dial clocks withthe rev counter built in so if ay one knows how to wire these in on the 1.3 id be greatfull for guidance.
also if any one has any parts that they think might be usefull to my project let me no
ill get some pics up when its sunny tommorow
cheers, lee
#5
hey peeps, me and luke have spent all day on the fez ~(as well as legalising his brothers car for its mot,)
got loads done, and its really starting to look like a car again,
got most of the interior out ad gave it a good hover, cleaned it up a bit more, then hit her with the pressure washer, got alot of the moss out of it
any, finally got the arch i started finished and sprayed in (but forgot to get a finished picture.
so heres a picture before i started at all
as you can se, pretty shity looking
heres a close up of the arch i started on
and another
started to strip out the clocks and that aswell, as ive got some white dial ones with the rev counter to go in
also pulled the standard radio out, as have no code for it, and found a old panasonic head unit and 8 disc boot loader to go in (not fitted yet)
note the pressiscion tools used there lol
also, managed to bolt the si wing back seats straight in(was told they wouldnt fit)
ill get a picture of the interio all cleaned up tommorow with both seats
picture of the asmatic engine (and the lunch plate)
picture of the last badge before i took it off
quite gutted that i forgot to take pictures when we'd finished, the ones ive take make the car look very shit
any ways, ill get some better ones tommorow.
ive also aquired some more parts, these include
fiesta si rear bumper,
rs turbo front vented breaks
si rear seats
white dial clocks
some 14 inch tempory alloys wick ill paint black
ill get these all fitted up soon
also adjusted the rear drumbs (big hammer) and got them working again, car now seems quite hapy to hand break turn which feels horrid on the tyres
pics of the new expensive glaases i bought lmao
thats a pit off beer and it dont even touch the sides lol
right after this photo, i thought that if i took my finger of the other whole as i tipped it up, it would act as a ruch whole for the air, what i didnt realise was that the beer would pour out al over me what a dick
heres a couple picis of the old mans car and the work ive been doing to that
so far fitted the new 17, apexi filter, raised boost to 1.1 bar, 3 inch staright through blue flame exhaust, de cat, re bolstered the seats, fitted tv dvd player, carbon slam panel, al the piping, oil catch tank (the beer one lmao)
on order for that isd the new front mount intercooler and hard pipe kit, then brembos, ill post pics when ive fitted them,
thanks for looking, any advice or comments welcome, good and bad,
another up date soon
got loads done, and its really starting to look like a car again,
got most of the interior out ad gave it a good hover, cleaned it up a bit more, then hit her with the pressure washer, got alot of the moss out of it
any, finally got the arch i started finished and sprayed in (but forgot to get a finished picture.
so heres a picture before i started at all
as you can se, pretty shity looking
heres a close up of the arch i started on
and another
started to strip out the clocks and that aswell, as ive got some white dial ones with the rev counter to go in
also pulled the standard radio out, as have no code for it, and found a old panasonic head unit and 8 disc boot loader to go in (not fitted yet)
note the pressiscion tools used there lol
also, managed to bolt the si wing back seats straight in(was told they wouldnt fit)
ill get a picture of the interio all cleaned up tommorow with both seats
picture of the asmatic engine (and the lunch plate)
picture of the last badge before i took it off
quite gutted that i forgot to take pictures when we'd finished, the ones ive take make the car look very shit
any ways, ill get some better ones tommorow.
ive also aquired some more parts, these include
fiesta si rear bumper,
rs turbo front vented breaks
si rear seats
white dial clocks
some 14 inch tempory alloys wick ill paint black
ill get these all fitted up soon
also adjusted the rear drumbs (big hammer) and got them working again, car now seems quite hapy to hand break turn which feels horrid on the tyres
pics of the new expensive glaases i bought lmao
thats a pit off beer and it dont even touch the sides lol
right after this photo, i thought that if i took my finger of the other whole as i tipped it up, it would act as a ruch whole for the air, what i didnt realise was that the beer would pour out al over me what a dick
heres a couple picis of the old mans car and the work ive been doing to that
so far fitted the new 17, apexi filter, raised boost to 1.1 bar, 3 inch staright through blue flame exhaust, de cat, re bolstered the seats, fitted tv dvd player, carbon slam panel, al the piping, oil catch tank (the beer one lmao)
on order for that isd the new front mount intercooler and hard pipe kit, then brembos, ill post pics when ive fitted them,
thanks for looking, any advice or comments welcome, good and bad,
another up date soon
Trending Topics
#10
ill get one up when im home,
bit bummed out no one is replyng to my project tho
fancy having a race to finish projects gaz??????
ill show ya how its done, got a bigg up data to do when i get in,
gotta fit all the new stereo gear today to, got a kenwood flip front head unit, 10 disc boot loader, and hopefully sub and amp
bit bummed out no one is replyng to my project tho
fancy having a race to finish projects gaz??????
ill show ya how its done, got a bigg up data to do when i get in,
gotta fit all the new stereo gear today to, got a kenwood flip front head unit, 10 disc boot loader, and hopefully sub and amp
#11
Advanced PassionFord User
Join Date: Mar 2006
Location: Slough, Berksire
Posts: 2,468
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by zippyobrien
ill get one up when im home,
fancy having a race to finish projects gaz??????
ill show ya how its done, got a bigg up data to do when i get in,
fancy having a race to finish projects gaz??????
ill show ya how its done, got a bigg up data to do when i get in,
LOOOOOOOOOOOOL
#13
15K+ Super Poster!!
looking good fella
the bolts are ether a alankey bolt or a star screw mines a fiesser wheel (don't ask ) lol
Good luck with it mate,
i can get you the code for the radio mate
pm me the code off the top of it
the bolts are ether a alankey bolt or a star screw mines a fiesser wheel (don't ask ) lol
Good luck with it mate,
i can get you the code for the radio mate
pm me the code off the top of it
#14
sweet, cheers gaz, ill do that,
um, they just feel totally round like i need to push them through, i might attack it with the angle grinder tommorow if i cant get it of, got a new wheel for it any ways
got the rs turbo front breaks on yesterday to,
ill get pics up,
just the sill to weld up now and shes ready for mot,
picked up my alloys today to, with the most disgusting tyre wear ever,
ill post picis tommorow,
cheers guys
um, they just feel totally round like i need to push them through, i might attack it with the angle grinder tommorow if i cant get it of, got a new wheel for it any ways
got the rs turbo front breaks on yesterday to,
ill get pics up,
just the sill to weld up now and shes ready for mot,
picked up my alloys today to, with the most disgusting tyre wear ever,
ill post picis tommorow,
cheers guys
#15
Team HOTHOT!
iTrader: (1)
dude u need to up load the pics lol , hurry up and get that welder and ill weld up ur sill !
think u owe me money now not the other way
2 si wing backs
mk4 fez white dial clocks
rst brakes and disks
coooooont my house is almost emty of car parts lol , come pic up that system lol then ill osrt out that loom , back box and filter ohhh and your 4th alloy lol
think u owe me money now not the other way
2 si wing backs
mk4 fez white dial clocks
rst brakes and disks
coooooont my house is almost emty of car parts lol , come pic up that system lol then ill osrt out that loom , back box and filter ohhh and your 4th alloy lol
#16
15K+ Super Poster!!
zippyobrien
Sounds like the alan key bolts lad, Think its a 8mm bolt on each side
the cars a 1997 aint it (P reg)
think the airbag models after 1995 had alan bolts
hope this Helps fella.
Sounds like the alan key bolts lad, Think its a 8mm bolt on each side
the cars a 1997 aint it (P reg)
think the airbag models after 1995 had alan bolts
hope this Helps fella.
#17
cheers bro,
and lavy, i thought we could get some pimping arrangement going
joking, ill sort you out mate, dont you worry.
you up for a trip to saqs scrappy, seems like some reall treasure there
gaz; il chat to you on msn later mate, need to grab that code,
chers
and lavy, i thought we could get some pimping arrangement going
joking, ill sort you out mate, dont you worry.
you up for a trip to saqs scrappy, seems like some reall treasure there
gaz; il chat to you on msn later mate, need to grab that code,
chers
#18
just spent another half hour uploading and sorting out pictures, i never realised how time consuming it is to update these projects, so majour respect to those of you who have regualr major updates.
been a busy bee again over the last few days,
after driving it and realising how shockingly bad the standard breaks are (luke89 will testify) i decided it was time for an upgrade and a freshen up at the same time
so here we have a set of very rusty rs turbo calipers, spent a while getting all the old shity fluid out of them and getting them back to good metal, then a nice paint job
in primer
and now on to the disks. the car came with non vented crap
as you can see this is gay lol
the passanger side all on and complete,
then the drivers,
decided to paint them silver, as unless youve got brembos they shouldnt be red
and the drumbs
got both wing backs in now to
its now finally starting to look like a car again, these are the alloys ill be going with for now, but im painting them black, so if any one has got soem 14 inch tyres for sale, pm me
and finnaly that fucking steering wheel bolt
another update soon when ive got the new clocks wired up
cheers for looking
been a busy bee again over the last few days,
after driving it and realising how shockingly bad the standard breaks are (luke89 will testify) i decided it was time for an upgrade and a freshen up at the same time
so here we have a set of very rusty rs turbo calipers, spent a while getting all the old shity fluid out of them and getting them back to good metal, then a nice paint job
in primer
and now on to the disks. the car came with non vented crap
as you can see this is gay lol
the passanger side all on and complete,
then the drivers,
decided to paint them silver, as unless youve got brembos they shouldnt be red
and the drumbs
got both wing backs in now to
its now finally starting to look like a car again, these are the alloys ill be going with for now, but im painting them black, so if any one has got soem 14 inch tyres for sale, pm me
and finnaly that fucking steering wheel bolt
another update soon when ive got the new clocks wired up
cheers for looking
#22
15K+ Super Poster!!
Originally Posted by zippyobrien
fancy having a race to finish projects gaz??????
ill show ya how its done, got a bigg up data to do when i get in,
ill show ya how its done, got a bigg up data to do when i get in,
No need to race as it can get childish lol
ill have mine done next year (bodywork and styleish wise)
#26
Originally Posted by 1stEscort
Only just seen this
No need to race as it can get childish lol
ill have mine done next year (bodywork and styleish wise)
got the clocks in, breaks on, new seats in, got the tint spray for the lights, the new welder, new sill, oil, filters, nearly finished the new frong grill with cold air inlet, hopefully got some ew tyres sorted, just eed to paint the rims and weld her up
so thats a car start to finish in a week, not bad for a 16 year old aye gaz lol
#29
im in full time education,
i work sat and sunday as an electrician, and i do 2 shifts a wek in the local sports shop, and i tech a martial arts club so i no bout the working lol, and im doing mine all by my self
im only pulling your leg gaz, dont really wanna race, and we no your doing your best
i work sat and sunday as an electrician, and i do 2 shifts a wek in the local sports shop, and i tech a martial arts club so i no bout the working lol, and im doing mine all by my self
im only pulling your leg gaz, dont really wanna race, and we no your doing your best