Dyno Dynamics
11-11-2009, 01:18 PM
#1
PassionFord Post Troll
Thread Starter
Dyno Dynamics
Even though it seems everybody and their dog is buying a DD rolling road on finance and calling themselves a tuner these days it obviously was not enough as they have gone bust!
11-11-2009, 01:34 PM
#3
Too many posts.. I need a life!!
Join Date: May 2003
Posts: 617
Likes: 0
Received 0 Likes
on
0 Posts
11-11-2009, 01:39 PM
#5
PassionFord Post Troll
Thread Starter
I think you have been left in the dark.
Happened yesterday.
03 9269 4226
That's the oz phone number of the administrators!
Last edited by Garage19; 11-11-2009 at 01:41 PM.
Trending Topics
11-11-2009, 02:19 PM
#10
PassionFord Post Whore!!
http://www.lancerregister.com/attach...8&d=1257931552
There is a letter about it on this thread,
Mike
There is a letter about it on this thread,
Mike
11-11-2009, 04:33 PM
#11
PassionFord Post Troll
Thread Starter
Its a bit crappy really because all these people that are still paying thousands for their rollers, that they thought was going to be a fairly valuable asset now may be in negative equity.
If you cannot source spares easily and do not have the back up of a trading company the value off DD rollers will drop dramatically.
If you cannot source spares easily and do not have the back up of a trading company the value off DD rollers will drop dramatically.
11-11-2009, 09:56 PM
#12
Too many posts.. I need a life!!
Join Date: May 2003
Posts: 617
Likes: 0
Received 0 Likes
on
0 Posts
I can't tell you too much at this stage but I can tell you
1. the company has NOT gone bust
2. more information will be revealed in the near future
3. the USA and European businesses are not affected in any way
1. the company has NOT gone bust
2. more information will be revealed in the near future
3. the USA and European businesses are not affected in any way
I wasn't worried, I think prices of used DD rollers might have actually increased if new ones were not available 
24-01-2010, 05:47 PM
#18
BANNED
BANNED
Join Date: Jul 2009
Location: Wiltshire
Posts: 673
Likes: 0
Received 0 Likes
on
0 Posts
is there an update to this, as I just recieved this email:
As you are may be aware, Dyno Dynamics are now no longer trading.
Dyno Torque has made contact with you to ascertain whether we can assist you with your prescribed service and maintenance requirements for your dyno
As your current software has a source code lock, we cannot help with calibration or software configurations,however Dyno Torque can offer you a retro fit, with our superior software upgrade, for your dyno should you require.
Dyno Torque software is windows based with an extensive list of features, not found on any other dyno software, one of these features included, as standard, is the ability to plot six (6) sensors on each pull, on the one graph.
Dyno Torque Software Plots
· Twin air fuel ratio lambda sensors
· Vacuum/ Boost intake manifold
· Power and Torque
If we can assist in any way please do not hesate to contact me by phone or email, for further details and information.
Regards,
Martin Brown
---
If they have gone pop Mike I would appreciate the source for the dyno software so I can develop some bits and pieces....
Not good!
Matt
As you are may be aware, Dyno Dynamics are now no longer trading.
Dyno Torque has made contact with you to ascertain whether we can assist you with your prescribed service and maintenance requirements for your dyno
As your current software has a source code lock, we cannot help with calibration or software configurations,however Dyno Torque can offer you a retro fit, with our superior software upgrade, for your dyno should you require.
Dyno Torque software is windows based with an extensive list of features, not found on any other dyno software, one of these features included, as standard, is the ability to plot six (6) sensors on each pull, on the one graph.
Dyno Torque Software Plots
· Twin air fuel ratio lambda sensors
· Vacuum/ Boost intake manifold
· Power and Torque
If we can assist in any way please do not hesate to contact me by phone or email, for further details and information.
Regards,
Martin Brown
---
If they have gone pop Mike I would appreciate the source for the dyno software so I can develop some bits and pieces....
Not good!
Matt
25-01-2010, 03:57 PM
#24
BANNED
BANNED
Join Date: Jul 2009
Location: Wiltshire
Posts: 673
Likes: 0
Received 0 Likes
on
0 Posts
Just spoke to Mike, everything is looking fine, its actually been bought by a new company, and they have a new edition of the software coming along :P
AlexF, go DD, best choice I ever made. Was looking at Mustang Dynos for about 6k less, but I am sooo happy when little boy racers say the 'dyno is reading under, my K&N should add ay least 90bhp' I turn around and say, yeh thats why BP have 12 sets of DD rollers for testing their fuel compounds... usually shuts them up! Don;t think I'd have that confidence with cheaper rollers.
Matt
AlexF, go DD, best choice I ever made. Was looking at Mustang Dynos for about 6k less, but I am sooo happy when little boy racers say the 'dyno is reading under, my K&N should add ay least 90bhp' I turn around and say, yeh thats why BP have 12 sets of DD rollers for testing their fuel compounds... usually shuts them up! Don;t think I'd have that confidence with cheaper rollers.
Matt
01-02-2010, 02:22 PM
#25
Too many posts.. I need a life!!
Join Date: May 2003
Posts: 617
Likes: 0
Received 0 Likes
on
0 Posts
03-02-2010, 11:56 PM
#29
Virgin
Join Date: Feb 2010
Location: australia
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
Link to the press release on the official website: http://www.dyno.com.au/dyno/controll...icle?newsId=25
Thread
Thread Starter
Forum
Replies
Last Post
bigluke200
Ford RS Cosworth Parts for Sale
14
02-09-2015 10:35 PM
yawiejon
General Car Related Discussion.
15
09-08-2015 06:36 PM
