Ford Sierra/Sapphire/RS500 Cosworth This forum is for discussion of all things pertaining to the Ford Sierra Cosworth.

technical data on engine managements systems

Thread Tools
 
Search this Thread
 
Old 29-11-2007, 10:23 AM
  #1  
oohogwash1
PassionFord Regular
Thread Starter
 
oohogwash1's Avatar
 
Join Date: Jul 2007
Posts: 450
Likes: 0
Received 1 Like on 1 Post
Default technical data on engine managements systems

I am a long time software systems engineer, I have built lots of different systems level software and played with hardware and a number of embedded chips used in automotive systems over the years.
I would like to get a little more serious in this area, especially as there are no real cosworth specialists in Australia at this level and I have the ability to manage a system and expand on it.
Can anyone point me to technical data on engine management system designs especially cosworth ECU / sensors as I have one etc.... Is there anyone that might teach me some of this so I can get my cosworth running nicely (its in bits currently). If there is a tuner that can help me learn I have 20yrs of engineering skills that will make some sweet software / hardware systems etc to match

Regards
Gavan
Old 30-11-2007, 06:38 AM
  #2  
Yura
Too many posts.. I need a life!!
 
Yura's Avatar
 
Join Date: Jul 2007
Location: Kiev, Ukraine
Posts: 581
Received 1 Like on 1 Post
Default Re: technical data on engine managements systems

Originally Posted by oohogwash1
I am a long time software systems engineer, I have built lots of different systems level software and played with hardware and a number of embedded chips used in automotive systems over the years.
I would like to get a little more serious in this area, especially as there are no real cosworth specialists in Australia at this level and I have the ability to manage a system and expand on it.
Can anyone point me to technical data on engine management system designs especially cosworth ECU / sensors as I have one etc.... Is there anyone that might teach me some of this so I can get my cosworth running nicely (its in bits currently). If there is a tuner that can help me learn I have 20yrs of engineering skills that will make some sweet software / hardware systems etc to match

Regards
Gavan
Do you have engine wiring diagram?
some info here:
http://www.cosworth.hu/?cat=2
Old 30-11-2007, 09:55 AM
  #3  
foreigneRS
Testing the future
 
foreigneRS's Avatar
 
Join Date: Jul 2003
Location: W. Sussex
Posts: 17,597
Received 24 Likes on 16 Posts
Default

there was a thread on here earlier in the week with some links that you would probably find interesting that looks to have disappeared
Old 30-11-2007, 10:08 AM
  #4  
stevecossy
PassionFord Regular
 
stevecossy's Avatar
 
Join Date: Sep 2007
Location: east yorks
Posts: 469
Likes: 0
Received 0 Likes on 0 Posts
Default

Try sending a pm to stu from MSD as he knows a shit load of stuff
Old 30-11-2007, 11:21 AM
  #5  
sailorbob
Too many posts.. I need a life!!
 
sailorbob's Avatar
 
Join Date: Jan 2005
Posts: 888
Likes: 0
Received 3 Likes on 2 Posts
Default

Originally Posted by foreigneRS
there was a thread on here earlier in the week with some links that you would probably find interesting that looks to have disappeared
I noticed that too. Deleting people's posts without informing them is annoying to say the least. If there has been some rule breaking etc then whoever deleted it could either edit the offending post and make an explanatory note why or at least pm the posters.

oohogwash1, I have pm'd you.
Old 30-11-2007, 02:19 PM
  #6  
oohogwash1
PassionFord Regular
Thread Starter
 
oohogwash1's Avatar
 
Join Date: Jul 2007
Posts: 450
Likes: 0
Received 1 Like on 1 Post
Default

I did some searchs before the post, and did not find anything, guess I just missed the post... I wonder if that thread can be recovered and restored...

Thank you for the pms and replies, the information is really useful, I have a good start and will keep looking for more information.

All information is useful in this early stage.

Being so far from a the mainstream of cosworth engines... I have to be careful , no risk no gain

I hope we get the deleted info back up, once I get this moving I have some new concepts that will be of interest... I am going to use my Cossie project as the test bed (again when it gets together).

Thanks again, I really appreciate it
Gavan



Thanks guys
Old 30-11-2007, 03:20 PM
  #7  
foreigneRS
Testing the future
 
foreigneRS's Avatar
 
Join Date: Jul 2003
Location: W. Sussex
Posts: 17,597
Received 24 Likes on 16 Posts
Default

it was only a very short post with input from sailorbob, myself and 1 other link from somebody else (sorry, can't remember who it was, but it was a good link)
Old 01-12-2007, 02:18 PM
  #8  
sailorbob
Too many posts.. I need a life!!
 
sailorbob's Avatar
 
Join Date: Jan 2005
Posts: 888
Likes: 0
Received 3 Likes on 2 Posts
Default

Here's one of those links;

http://rpm.planetaclix.pt/ecu/IAW.htm
Old 01-12-2007, 09:06 PM
  #9  
ossie cossie
I've found that life I needed.. It's HERE!!
 
ossie cossie's Avatar
 
Join Date: Oct 2005
Location: Perth Western Australia
Posts: 1,453
Received 30 Likes on 28 Posts
Default

oohogwash 1 you have pm.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Stu @ M Developments
General Car Related Discussion.
41
21-08-2015 06:47 AM
Bailes1992
General Car Related Discussion.
4
16-08-2015 07:14 PM
Old ford
Ford RS Cosworth Parts for Sale
0
31-07-2015 06:50 AM



Quick Reply: technical data on engine managements systems



All times are GMT. The time now is 04:38 AM.