Zetec turbo fiesta track car project
#1
Kapow!!
Thread Starter
Zetec turbo fiesta track car project
Regrettably have to sell my fiesta
It was an xr2i 16v.
Had respray 2 months ago in Ferrari Silverstone Grey.
Engine: 1.8 silvertop zetec fully rebuilt, with all new parts, ARP rod bolts Audi TT pistons, forged rods, Devil Developments valve springs, focus RS exhaust manifold and turbo, new genuine ford turbo gasket and turbo- exhaust clamp, new custom oil feed pipe, new aluminium radiator, pro alloy intercooler and fans, 16 row oil cooler with complete fitting kit, focus rs decat pipe, stainless system, focus blacktop inlet manifold, focus rs injectors, forge turbo actuator, brand new (still in the box) Omex 600 ecu and loom (ready to make), straight cut gear set with LSD, built with full gearbox rebuilt kit, vibra technics mounts, helix race clutch kit (brand new), AEM turbo boost solenoid, brand new in box's- AEM boost gauge, AEM wideband AFR gauge kit, Exhaust gas temp gauge kit, oil pressure and oil temp warning light kits
OMP roll cage and seat, standard passenger seat also fitted, both with harnesses, plumbed in fire extinguisher, battery cut off, team dynamics 15" alloys, yokohama AO48 tyres, german rear lights, perspex windows, GAZ coilovers.
Probably loads more ive forgotten.
Owes me around £6000
All that needs doing:
Fit rad, intercooler, oil cooler
Fit inlet manifold
Trim bumper to fit over coolers then paint and fit (have left over paint)
Fit front lights and aero bonnet catches (included)
Have boost pipe set made
Fit uprated fuel pump
Modify downpipe to fit exhaust
Make ecu loom with original plugs from old loom
Mapping...
Was aiming for a safe 300bhp+ Track car.
Will take £3000 for quick sale
Message me on here, or txt/ call
07519214689
It was an xr2i 16v.
Had respray 2 months ago in Ferrari Silverstone Grey.
Engine: 1.8 silvertop zetec fully rebuilt, with all new parts, ARP rod bolts Audi TT pistons, forged rods, Devil Developments valve springs, focus RS exhaust manifold and turbo, new genuine ford turbo gasket and turbo- exhaust clamp, new custom oil feed pipe, new aluminium radiator, pro alloy intercooler and fans, 16 row oil cooler with complete fitting kit, focus rs decat pipe, stainless system, focus blacktop inlet manifold, focus rs injectors, forge turbo actuator, brand new (still in the box) Omex 600 ecu and loom (ready to make), straight cut gear set with LSD, built with full gearbox rebuilt kit, vibra technics mounts, helix race clutch kit (brand new), AEM turbo boost solenoid, brand new in box's- AEM boost gauge, AEM wideband AFR gauge kit, Exhaust gas temp gauge kit, oil pressure and oil temp warning light kits
OMP roll cage and seat, standard passenger seat also fitted, both with harnesses, plumbed in fire extinguisher, battery cut off, team dynamics 15" alloys, yokohama AO48 tyres, german rear lights, perspex windows, GAZ coilovers.
Probably loads more ive forgotten.
Owes me around £6000
All that needs doing:
Fit rad, intercooler, oil cooler
Fit inlet manifold
Trim bumper to fit over coolers then paint and fit (have left over paint)
Fit front lights and aero bonnet catches (included)
Have boost pipe set made
Fit uprated fuel pump
Modify downpipe to fit exhaust
Make ecu loom with original plugs from old loom
Mapping...
Was aiming for a safe 300bhp+ Track car.
Will take £3000 for quick sale
Message me on here, or txt/ call
07519214689
Last edited by TomPengelly; 03-04-2015 at 02:52 PM. Reason: Forgot details
Thread
Thread Starter
Forum
Replies
Last Post
JoeyBoyden
Restorations, Rebuilds & Projects.
26
04-01-2024 02:36 PM