My Post Pictures

February 2, 2018

336

0

0 2018/02/20 12:32:14 qed296

0 2018/02/20 12:31:29 qed296

0 2018/02/20 12:30:27 qed296

Had mixed results via Google and searching here.

Thanks

Had mixed results via Google and searching here. Thanks

0 2018/02/13 11:48:17 qed296

0 2018/02/06 02:03:02 qed296

0 2018/02/05 14:09:26 qed296

0 2018/02/05 11:05:34 qed296

0 2018/02/05 10:39:55 qed296

0 2018/02/05 10:20:07 qed296

Now with an original hose laid over the blue hose its clear the extra material on the bend is the problem....i have put the o/e hose onto the turbo housing and it does create exra room for the airbox to fit in....

Now with an original hose laid over the blue hose its clear the extra material on the bend is the problem....i have put the o/e hose onto the turbo housing and it does create exra room for the airbox to fit in....

0 2018/02/02 13:00:51 qed296

Hose off, intercooler end is 60mm o/d .....turbo housing is 50mm/52mm

Hose off, intercooler end is 60mm o/d .....turbo housing is 50mm/52mm

0 2018/02/02 12:57:48 qed296

0 2018/02/02 12:56:22 qed296

I think all is clear now, with the turbo end of the orange/red hose on the air box seems a little easier to slot down, i think if theres a hose available with s 50mm turbo /60mm intercooler end and this profile it should be a clean fit.....

0 2018/02/02 12:03:12 qed296

Now with the hose off, the intercooler end is 60mm and the turbo 50mm but i found another o/e hose and laid it over the silicone one....

Now with the hose off, the intercooler end is 60mm and the turbo 50mm but i found another o/e hose and laid it over the silicone one....

0 2018/02/02 12:01:10 qed296

Heres one from above with the hise in place.

Heres one from above with the hise in place.

0 2018/02/02 12:00:10 qed296

Just a test pic....the washer bottle has been dropped out for a bent neck type....I'm off out the garge to get some decent pictures. Thanks for the help...pictures make things so much easier to explain

Just a test pic....the washer bottle has been dropped out for a bent neck type....I'm off out the garge to get some decent pictures. Thanks for the help...pictures make things so much easier to explain

0 2018/02/02 10:22:44 qed296

Page
9 of 9

Go To
Page

Go to page of 9 pages

1
2
3
4
5
6
7
8
9