PassionFord - Ford Focus, Escort & RS Forum Discussion
Aprilia supermoto frame fully stripped ready to go off and be dipped then powder coated.
Aprilia supermoto frame fully stripped ready to go off and be dipped then powder coated.
0 2020/05/02 12:48:01
Bought a book....this is really interesting and Ihighly recommend.
Bought a book....this is really interesting and Ihighly recommend.
0 2020/05/02 12:48:10
Pallet of floor tiles arrived for garage extension, these are not the squishy ones...laid it today.
Pallet of floor tiles arrived for garage extension, these are not the squishy ones...laid it today.
0 2020/05/02 12:48:21
My first print. It is now doing my first design for my gas cooker knob.
My first print. It is now doing my first design for my gas cooker knob.
0 2020/06/03 14:24:33
Can use neat or diluted. I believe they may work better with Dion I see water (at least that is what my ultrasonic cleaner company says)
Can use neat or diluted. I believe they may work better with Dion I see water (at least that is what my ultrasonic cleaner company says)
0 2020/06/12 03:11:18
Cagiva Mito.
Cagiva Mito.
0 2020/06/17 11:54:48
0 2020/06/17 11:54:59
0 2020/06/17 11:55:06
Cagiva Mito
Cagiva Mito
0 2020/06/17 11:56:31
0 2020/06/17 11:56:39
0 2020/06/17 11:56:46
Aprilia Supermoto
Aprilia Supermoto
0 2020/06/17 11:57:56
0 2020/06/17 11:58:06
0 2020/06/17 11:58:16
0 2020/06/17 11:58:27
This last pic shows my other lock down project....bike garage built with my own fair hands.
This last pic shows my other lock down project....bike garage built with my own fair hands.
0 2020/06/17 11:58:36
Super moto all,done.
Super moto all,done.
0 2020/11/10 10:59:45
Ready for stickers
Ready for stickers
0 2020/11/10 10:59:56
Cagiva Mito engine rebuilt with factory ported barrel.
Cagiva Mito engine rebuilt with factory ported barrel.
0 2020/11/10 11:00:01
Stickers on as per factory.
Stickers on as per factory.
0 2020/11/10 11:00:08
Just made this storm trooper set, a parody of the famous pic of the guys eating lunch on the girder of the sky scraper. I now need to paint them white and then add back the correct black bits.
Just made this storm trooper set, a parody of the famous pic of the guys eating lunch on the girder of the sky scraper. I now need to paint them white and then add back the correct black bits.
0 2020/11/11 09:23:50
0 2020/11/18 01:33:30
0 2020/11/28 00:37:27
0 2021/03/03 01:45:50
0 2021/03/03 01:45:57
0 2021/03/03 01:46:03
0 2021/03/03 01:46:11
0 2021/11/14 14:08:52
0 2021/11/14 14:08:58
0 2021/11/14 14:09:01
Test fitting the T16 rally wing to the Carbon Kevlar rear boot lid.
Test fitting the T16 rally wing to the Carbon Kevlar rear boot lid.
0 2022/05/12 12:39:24
The bootlid is sitting too high due to it touching the spit.
The bootlid is sitting too high due to it touching the spit.
0 2022/05/12 12:39:40
0 2022/05/12 12:40:02
The ends where they meet the body will need some work.
The ends where they meet the body will need some work.
0 2022/05/12 12:40:33
0 2022/05/12 12:41:12
Here you can see the rumpled up inner wing. I didn’t want the hole left between the new turret and the inner wing so sorting that at same time. The dampers also hit the turrets in 2 places so needed cutting out. I am a mortgage broker and not a welder but at least I am doing it which is gonna get it done.
Here you can see the rumpled up inner wing. I didn’t want the hole left between the new turret and the inner wing so sorting that at same time. The dampers also hit the turrets in 2 places so needed cutting out. I am a mortgage broker and not a welder but at least I am doing it which is gonna get it done.
0 2022/05/12 12:47:20
Filled the holes and you can see where I had to box in the turrets.
Filled the holes and you can see where I had to box in the turrets.
0 2022/05/12 12:50:59
The strut remote reservoirs were hitting the inside of the tower so you can see why I boxed them at each end. The adjuster knob on the other side hit too, see below.
The strut remote reservoirs were hitting the inside of the tower so you can see why I boxed them at each end. The adjuster knob on the other side hit too, see below.
0 2022/05/12 12:56:25
That bump stop has also gone now and all under seal now stripped out, all the seams are being stitch welded now.
That bump stop has also gone now and all under seal now stripped out, all the seams are being stitch welded now.
0 2022/05/12 12:57:25
I know these are out of order, sorry. Here I am competing the welds where the new struts were put in. Everything will be bare metalled where needed as it will be white now, like the t16 rally cars.
I know these are out of order, sorry. Here I am competing the welds where the new struts were put in. Everything will be bare metalled where needed as it will be white now, like the t16 rally cars.
0 2022/05/12 13:03:48