PassionFord - Ford Focus, Escort & RS Forum Discussion
0 2018/07/28 01:56:49
0 2018/07/28 01:59:32
0 2018/07/28 02:07:34
0 2018/07/28 02:12:49
0 2018/07/28 03:17:32
0 2018/12/04 13:19:27
0 2019/03/07 15:27:57
0 2019/03/08 13:51:54
0 2019/03/08 13:53:38
8v recon head with piper cams non slip valve guides
8v recon head with piper cams non slip valve guides
0 2019/03/09 14:08:10
Forged pistons
Forged pistons
0 2019/03/09 14:08:22
Cosworth green injectors
Cosworth green injectors
0 2019/03/09 14:08:34
Lumenition wiring loom
Lumenition wiring loom
0 2019/03/09 14:08:45
Lumenition witing diagram
Lumenition witing diagram
0 2019/03/09 14:08:55
Modified cosworth to 8v inlet manifold
Modified cosworth to 8v inlet manifold
0 2019/03/09 14:09:06
Cosworth rocker cover and leads
Cosworth rocker cover and leads
0 2019/03/09 14:09:16
Forged connecting rods
Forged connecting rods
0 2019/03/09 14:09:25
Lumenition ecu
Lumenition ecu
0 2019/03/09 14:09:35
Cosworth exhaust manifold and turbo
Cosworth exhaust manifold and turbo
0 2019/03/09 14:09:45
Rs500 fmic inlet and outlet will be at top of engine bay
Rs500 fmic inlet and outlet will be at top of engine bay
0 2019/03/09 14:09:56
Engine ready to be lifted out, bolts loosened from gearbox. Should have engine hoist by the weekend to get it out and dimantle head from the block
Engine ready to be lifted out, bolts loosened from gearbox. Should have engine hoist by the weekend to get it out and dimantle head from the block
0 2019/03/11 15:13:43
0 2019/03/11 15:20:56
Turbo kit bought as job lot from powermax eng cookstown NI
Turbo kit bought as job lot from powermax eng cookstown NI
0 2019/03/11 15:27:54
Piper cams non slip valve guides complete recon head
Piper cams non slip valve guides complete recon head
0 2019/03/11 15:29:41
Forged pistons
Forged pistons
0 2019/03/11 15:29:51
Cosworth injectors
Cosworth injectors
0 2019/03/11 15:30:02
Wiring loom
Wiring loom
0 2019/03/11 15:30:13
Loom manual
Loom manual
0 2019/03/11 15:30:23
Inlet manifold
Inlet manifold
0 2019/03/11 15:30:34
Performance connecting rods
Performance connecting rods
0 2019/03/11 15:30:43
Ecu
Ecu
0 2019/03/11 15:30:55
Exhaust manifold + turbo
Exhaust manifold + turbo
0 2019/03/11 15:31:06
Rs500 fmic
Rs500 fmic
0 2019/03/11 15:31:17
Took me 7 hours to get it to the stage that the engine can be lifted out Im gong to hire a hoist at the weekend to remove the engine and then i can dismantle the head for sending the block to engineering shop,
Took me 7 hours to get it to the stage that the engine can be lifted out Im gong to hire a hoist at the weekend to remove the engine and then i can dismantle the head for sending the block to engineering shop,
0 2019/03/11 15:34:21
0 2019/03/12 14:24:58
My 2000e
My 2000e
0 2019/03/12 14:28:48
0 2019/03/15 16:17:05
Took fuel tank out this evening, i have to change my intank fuel pump for a bosch 910 in line fuel pump to cope with the cosworth injectors and mor bhp, the in tank pump was playing up anyway with it shuddering sometimes under half a tank, If anyone has any tips on setting up in line fuel pump id be happy to here your opinions or if youve done this before have any pictures and route you took and location of pump and filter?
Took fuel tank out this evening, i have to change my intank fuel pump for a bosch 910 in line fuel pump to cope with the cosworth injectors and mor bhp, the in tank pump was playing up anyway with it shuddering sometimes under half a tank, If anyone has any tips on setting up in line fuel pump id be happy to here your opinions or if youve done this before have any pictures and route you took and location of pump and filter?
0 2019/03/16 13:09:50
Took the petrol tank out this evening, i have to replace the jn tank fuel pump with a in line bosch 910 pump as the in tank is not strong enough to run more bhp If anyone has any tips or has done this before i would lije to know hoe you went about doing it, route location of pump and filter fittings needed electrics,
Took the petrol tank out this evening, i have to replace the jn tank fuel pump with a in line bosch 910 pump as the in tank is not strong enough to run more bhp If anyone has any tips or has done this before i would lije to know hoe you went about doing it, route location of pump and filter fittings needed electrics,
0 2019/03/16 14:14:09
New cosworth tank in, pretty simple job only difference in the tanks are the outlet and return pipes are at the bottom for the purpose of an in line pump, Got a level sender off a mate it plugs into original wiring which is convenient,
New cosworth tank in, pretty simple job only difference in the tanks are the outlet and return pipes are at the bottom for the purpose of an in line pump, Got a level sender off a mate it plugs into original wiring which is convenient,
0 2019/03/30 02:57:41