Ask The Breakers!
03-02-2011, 09:43 AM
#601
I've found that life I needed.. It's HERE!!
iTrader: (1)
Join Date: Jul 2003
Location: Milton Keynes
Posts: 1,455
Likes: 0
Received 0 Likes
on
0 Posts
Need some 4x4 Saph suspension bits
My Saph is currently on coilovers and I'm converting back to normal Koni struts and springs etc. I've got the struts, shocks and springs but need everything else to fit them. I know I need the rubber rings that go on the rear springs, front bumpstops,dust covers,top cups and bearings and anything else you can think of.
Cheers Gaz !
Cheers Gaz !
03-02-2011, 12:33 PM
#602
PassionFord Regular
Join Date: Aug 2010
Location: Tyne & Wear
Posts: 389
Likes: 0
Received 0 Likes
on
0 Posts
My Saph is currently on coilovers and I'm converting back to normal Koni struts and springs etc. I've got the struts, shocks and springs but need everything else to fit them. I know I need the rubber rings that go on the rear springs, front bumpstops,dust covers,top cups and bearings and anything else you can think of.
Cheers Gaz !
Cheers Gaz !
18-02-2011, 02:29 PM
#603
I've found that life I needed.. It's HERE!!
iTrader: (1)
Join Date: Feb 2010
Location: I my Garage. andover
Posts: 1,093
Likes: 0
Received 0 Likes
on
0 Posts
hello the breakers. my wife has a 02 mk6 fiesta tdci. im am after making it look like the z-s or st. off the top of my head i will need: boot, bonnet, lights front and back, bumpers, skirts and wing mirrors. iv got Ł600/700 to spend more if it red already.
if anyone can help it would
thanks luke
if anyone can help it would
thanks luke
XR4x4 o/s front Drive Shaft
13-03-2011, 07:48 AM
#611
15000
Join Date: Dec 2010
Location: northants
Posts: 28
Likes: 0
Received 0 Likes
on
0 Posts
rear black leather seat for granada scorpio (not frog eye)
need the panels with the small hole imprints in them to recover some panels on my esc cos leathers. must be black.
thanks
thanks
14-03-2011, 08:09 AM
#612
Regular Contributor
Join Date: Mar 2010
Location: West Lothian
Posts: 218
Likes: 0
Received 0 Likes
on
0 Posts
Im looking for lowering springs for a mk4 xr3i cabrio, any height considered. I have a snapped spring so need something asap. Also if anyone has an upper offside engine mount (its the efi model) in good nick too. In scotland, can collect locally. Cheers 
14-03-2011, 12:58 PM
#613
PassionFord Regular
Hi I'm going to replace my exhaust manifold gasket on my series 2 and would like to know how much for a set of exhaust studs and nuts and the studs and nuts for the turbo down pipe.
Thanks guys
Thanks guys
27-03-2011, 10:11 PM
#615
Virgin
Join Date: Aug 2009
Location: Ireland
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
30-03-2011, 02:44 PM
#616
Virgin
Join Date: Jan 2011
Location: Solihull
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
Sump Pan, 52 (jan 03) Focus 2.0
Hello,
I asked this a while ago but never really got anywhere. My sump pan is corroded and really needs replacing but I've been told by one breaker that the part varies so I'd need the real part number, but this is pretty much obscured so how can I tell which one I need? I was given a FINIS number of 1053869 but I'm not sure that helps? It's got 130K miles on so I don't want to go spending main dealer prices on the car, it isn't worth it.
Thanks,
I asked this a while ago but never really got anywhere. My sump pan is corroded and really needs replacing but I've been told by one breaker that the part varies so I'd need the real part number, but this is pretty much obscured so how can I tell which one I need? I was given a FINIS number of 1053869 but I'm not sure that helps? It's got 130K miles on so I don't want to go spending main dealer prices on the car, it isn't worth it.
Thanks,
30-03-2011, 03:42 PM
#617
PassionFord Regular
Join Date: Aug 2010
Location: Tyne & Wear
Posts: 389
Likes: 0
Received 0 Likes
on
0 Posts
Hello,
I asked this a while ago but never really got anywhere. My sump pan is corroded and really needs replacing but I've been told by one breaker that the part varies so I'd need the real part number, but this is pretty much obscured so how can I tell which one I need? I was given a FINIS number of 1053869 but I'm not sure that helps? It's got 130K miles on so I don't want to go spending main dealer prices on the car, it isn't worth it.
Thanks,
I asked this a while ago but never really got anywhere. My sump pan is corroded and really needs replacing but I've been told by one breaker that the part varies so I'd need the real part number, but this is pretty much obscured so how can I tell which one I need? I was given a FINIS number of 1053869 but I'm not sure that helps? It's got 130K miles on so I don't want to go spending main dealer prices on the car, it isn't worth it.
Thanks,
http://www.carpartsexpress.co.uk/Foc...-3-34-681-354/
In stock ready for next day delivery
Thanks
Graham
16-04-2011, 09:47 AM
#619
I'm Finding My Feet Here Now
MT75 Clutch Fork
Hi can anybody help I need an MT75 4x4 Clutch Fork changing from a centre clutch as I have had nothing but trouble with it over stroking and blowing the seal out
08-05-2011, 11:05 AM
#623
turbovh
Join Date: May 2011
Location: scotland yard
Posts: 248
Likes: 0
Received 0 Likes
on
0 Posts
im after a fiesta turbo loom and ecu dont mind ofab or ofac currewntly got a ofac ecu but cant find the act snesor for one any help will be appreciated many thanks-07976677447
16-06-2011, 06:14 PM
#627
15000
Join Date: Jan 2008
Posts: 40
Likes: 0
Received 0 Likes
on
0 Posts
Looking for the little loom for the headlamp wipers.
of a ford sierra sapphire
loom connects from behind the dash to the little wipers to the extra pump
anyone has one and willing to send to the NL?
of a ford sierra sapphire
loom connects from behind the dash to the little wipers to the extra pump
anyone has one and willing to send to the NL?
29-06-2011, 02:47 PM
#630
new
Join Date: Apr 2008
Location: around
Posts: 23
Likes: 0
Received 0 Likes
on
0 Posts
looking for a mk1 xr2 engine
as title says, i'm after a mk1 xr2 engine as complete as poss, my email is ds004c9652@blueyonder.co.uk as i dont check back here that often.
15-07-2011, 04:56 PM
#632
Virgin
Join Date: Aug 2009
Location: glasgow
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
Mk1 Fiesta wings
Hi. I am looking for Mk1 fiesta wings for my fiesta xr2 fly project. Tried all the usual panel places, Hadrian Panels etc, but they don't stock them anymore. Don't need to be new or in perfect order, just decent and not wrecked. Any help would be appreciated.
Thanks
Thanks
05-08-2011, 07:57 PM
#635
PassionFord Regular
09-08-2011, 02:01 AM
#636
Virgin
Join Date: Aug 2011
Location: Ontario, Canada
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
Hi, I'm wondering if there are any breakers that are willing to post a Focus MK1 or MK1.5 front bumper over to Ontario Canada N1E 5L1?
It doesn't have to be packaged greatly just some bubble wrap of something around it would be sufficient.
Thanks
Shawn
It doesn't have to be packaged greatly just some bubble wrap of something around it would be sufficient.
Thanks
Shawn
09-08-2011, 06:45 AM
#637
Wahay!! I've lost my Virginity!!
Join Date: Nov 2010
Location: Bedworth
Posts: 70
Likes: 0
Received 0 Likes
on
0 Posts
hi all,
need a couple of nothing items really, if you can help please let me know price and postage to cv120dw (PM Me).
need a Fuel Pump Push Rod For A 1600 CVH, (rod that is pushed by cam to pump the mechanical Fuel pump on carb models).
Also need the plugs (with a couple inchs of wire attached still) for the clocks, (rev counter / Fuel gauge, temp etc) The two large rectangle plugs, But must be of a model with a rev counter fitted. Mk3 Escort
Hope you can help.
need a couple of nothing items really, if you can help please let me know price and postage to cv120dw (PM Me).
need a Fuel Pump Push Rod For A 1600 CVH, (rod that is pushed by cam to pump the mechanical Fuel pump on carb models).
Also need the plugs (with a couple inchs of wire attached still) for the clocks, (rev counter / Fuel gauge, temp etc) The two large rectangle plugs, But must be of a model with a rev counter fitted. Mk3 Escort
Hope you can help.
27-08-2011, 11:42 PM
#638
Virgin
Join Date: Aug 2011
Location: rotherha
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
st220 bits needed
Hi everyone i need a drivers side washer jet cover on the bumper of an st220 and drivers side rear jacking point cover from the side skirt pref panther black but any other colour will do Some thieving TW@ took mine last night 
Cheers in advance guys/gals.
Some thieving TW@ took mine last night Cheers in advance guys/gals.
