i have a 4wd intercooler to fit to my 2wd, should this a straight swap as i couldnt fit it earlier.

cheers paul

 

afaik should be a straight swap.


Dave.

 

It aint you have to hack the corners off the intercooler

 

Hi,

Is it necessary to change boost hoses, or is it possible to reuse old hoses intercooler 2wd ?

Regards
Claude

 

the hoses are the same width so no probs there.



Dave.

 

Thanks, Dave.

 

Since the 4x4 intercooler is about an inch deeper, when i did the swap, i cut an inch or so off the length of my hoses.
I also had to trim part of the radiator (metal part where the intercooler fixes, on the left i think), so the 4x4 would sit down properly. Nothing major though.

good luck.

 

ok thanks, i will try again when i get 5mins

cheers paul

 

fits easy have to drop rad to get in also need to cut boost hoses down each side bout 1-2inch