fitted pro alloy intercooler twin fan jobbie

its now getting well hot in traffic (really really hot even with the fans running and the heater on)

any other mods any one done to help keep it cool on a series one

ive got bonnet raiser blocks to go on . im obtaining a different fan switch drilled big holes in bumper and moved the number plate

does water wetter work and removeing the spot lights does that help(or not when stationary) or is a bigger rad and electric water pump
my only option

u have properly done what everybody else normally do, got the two wires to the fans the wrong way round causing the fans to suck rather than blow, change the wires around and it will be fine

nope checked that ,got the third fan fitted so ill go out when its hot and try again

3 fans wow..

I got 2 kenlows 10" and they work fine.
82 stat
cossie fan switch

hope ya sort it..

you could always drill 2 x 2mm holes in the thermostat.. the part that lifts ..
this allows some water flow but isnot enough to effect the running.

ill give that a go cheers lad

three fans and it doesnt get hot in traffic

now i know it works ill get a proper fan that pulls ,rather than the standard one in reverse. also getting the right size to fit the room available