Flamer Kit
Thread Starter
I've found that life I needed.. It's HERE!!
Joined: May 2004
Posts: 1,474
Likes: 0
From: Barnsley, South Yorkshire
Flamer Kit
Have a look at this website http://www.coltturbo.com/flamerkit.htm
Wouldn't this overload the system?
Cheers
Dave
Wouldn't this overload the system?
Cheers
Dave
Regular Contributor
Joined: Apr 2005
Posts: 240
Likes: 0
he forgot to mention that the fuel mixture must be richend or that something flamable must be injected into the exauhst (highly dangerous).
The kits they sell are outrageously priced.. Mine will be built for around $30
one needs a controller for the coil to turn it on and off rapidly. putting constant power to a coild cant be good. constant power to the plug will result in it over heating and melting.
Alot of systems for older carburated cars just have a ignition cut out and run it rich, that way when they floor it and activate it theree is excessive gass in the exauhst. works alright.. but not my style.
Mine will be a safety device for my bumper!!! so watch out you BMW tailgaters! I will roast your bumper
EDIT: http://www.constella.co.uk/flamerkit/new_page_1.htm
TF
The kits they sell are outrageously priced.. Mine will be built for around $30
one needs a controller for the coil to turn it on and off rapidly. putting constant power to a coild cant be good. constant power to the plug will result in it over heating and melting.
Alot of systems for older carburated cars just have a ignition cut out and run it rich, that way when they floor it and activate it theree is excessive gass in the exauhst. works alright.. but not my style.
Mine will be a safety device for my bumper!!! so watch out you BMW tailgaters! I will roast your bumper
EDIT: http://www.constella.co.uk/flamerkit/new_page_1.htm
TF
