chip need ure help here
05-06-2005, 04:43 PM
#1
Wahay!! I've lost my Virginity!!
Thread Starter
Join Date: May 2005
Location: hampshire
Posts: 61
Likes: 0
Received 0 Likes
on
0 Posts
chip need ure help here
i have got a DOHC 2.0 8v EFI engine sat here that i am going to be rebuilding for my car soon.
i want to add a nitrous system to it but to be honest i do not have a clue when it comes to this stuff.
what sort of setup would you recommend to give a good increase in power i am looking for a 15-20bhp increase or there abouts and i want it to activate at maximum throttle but still be on an arming switch.
also is there and precautions i have to take with the engine before i start putting nitrous through it.
cheers
i want to add a nitrous system to it but to be honest i do not have a clue when it comes to this stuff.
what sort of setup would you recommend to give a good increase in power i am looking for a 15-20bhp increase or there abouts and i want it to activate at maximum throttle but still be on an arming switch.
also is there and precautions i have to take with the engine before i start putting nitrous through it.
cheers
Thread
Thread Starter
Forum
Replies
Last Post