Hi all .. someone good at pectel wiring?
Must do some wiring to power up my ECU from car.
And the question is about the chassi, splitt conector 16 way..
i have understand that this could be different from car to car. Here is a picture of what i have sortened out. But some of this is greek to me.
Hope for some help..

 

Gary Barker
ex pectel
owns/owned g tech
but think he works for life racing now

 

Manage to get contact with ecu.
as i only have profiles for t2 i cant get in.
Anyone who would help me with profils to t6?

 

Go on the Cosworth site , go on the support on the right of the page there are people who can help you with the profiles , there are some clever people on there , you will need to register , hope it’s helps

 

thanks... I Will try.👍

 

That profile is allocated by a particular Tuner....I have some Profiles but mine were T6v1-21, I did acquire the profiles used by Mellors when they were running Esc Cos as we bought one of there cars....Ideally you would need to know who programmed the ECU and if they would release the profile to you....if you don't have the profile you will not get into the ECU....the Profiles are just text files ASAIK so very small if you send me an e-mail addy I will send you what I have...

 

Thanks.
but this is now ok. I got the files i needed.