1.4 Tdci inlet manifold seals
#1
Virgin
Thread Starter
Join Date: Sep 2017
Location: shrewsbury
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
1.4 Tdci inlet manifold seals
Been a few years since I have last been on here, new user name to now,
Replaced the injector seals on my 1.4 Tdci fiesta, all gone well,
After refitting new seals on the inlet manifold , I can't seem to get them back into the head,
If u have done the job hopefully you will know what I mean,
Tried everything I possible can to push them in,
All help is much appreciated, cheeRS
Replaced the injector seals on my 1.4 Tdci fiesta, all gone well,
After refitting new seals on the inlet manifold , I can't seem to get them back into the head,
If u have done the job hopefully you will know what I mean,
Tried everything I possible can to push them in,
All help is much appreciated, cheeRS
#2
Too many posts.. I need a life!!
I've just done same job just placed them over the plastic manifold piece little bit of oil around them and pushed it into the alloy manifold piece.If I remember correctly the preheat wiring run near it make sure your not jamming it in