Hi guys..first post.
#1
15000
Thread Starter
Join Date: Aug 2017
Location: Gosport
Posts: 20
Likes: 0
Received 0 Likes
on
0 Posts
Hi guys..first post.
Hi all.
Just thought id say hello as iv only just joined.
My plans, to turbo my 1800 silvertop zetec and put it in my car.
Looking at around 250lbs ft
If i could get a donor 2.0 id use that instead but i have the 1.8, long term project as funds and time allow.
Great to be onboard
Just thought id say hello as iv only just joined.
My plans, to turbo my 1800 silvertop zetec and put it in my car.
Looking at around 250lbs ft
If i could get a donor 2.0 id use that instead but i have the 1.8, long term project as funds and time allow.
Great to be onboard
#2
15000
Thread Starter
Join Date: Aug 2017
Location: Gosport
Posts: 20
Likes: 0
Received 0 Likes
on
0 Posts
So just to add, been doing a bit of research over last few weeks. Ive looked at the Garrett T3 from RS Turbos and looks like that has a limit of 220bhp. A larger wheel here and there will not only increase air flow but cost aswell.
Im considering buying a donor engine and transplating the bits from it to my zetec. Does anyone have any ideas on this?. Thinking a 1.8 Audi,
Im considering buying a donor engine and transplating the bits from it to my zetec. Does anyone have any ideas on this?. Thinking a 1.8 Audi,