2008 1.8 Zetec Focus - functions delay
06-06-2017, 10:00 AM
#1
Virgin
Thread Starter
Join Date: Jun 2017
Location: Leicestershire
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
2008 1.8 Zetec Focus - functions delay
Hello,
I have had a 2008 Focus 1.8 Zetec for about eight months, and in the last few weeks, I've noticed that the windows (driver and passenger sides) won't operate for around 12 seconds after the ignition is turned on.
Then I noticed that on the speedo dial, the engine icon & the stability control icon don't extinguish, and the max RPM icon (red 'up' arrow) in the rev counter window stays on too on for the same time. When they go off, the electrics work properly.
Anybody got any ideas as to what the cause might be?
Phill
I have had a 2008 Focus 1.8 Zetec for about eight months, and in the last few weeks, I've noticed that the windows (driver and passenger sides) won't operate for around 12 seconds after the ignition is turned on.
Then I noticed that on the speedo dial, the engine icon & the stability control icon don't extinguish, and the max RPM icon (red 'up' arrow) in the rev counter window stays on too on for the same time. When they go off, the electrics work properly.
Anybody got any ideas as to what the cause might be?
Phill
Last edited by birchyboy; 06-06-2017 at 10:01 AM. Reason: Layout
