Fiesta Lambda Sensor
Thread Starter
Regular Contributor
Joined: Nov 2008
Posts: 241
Likes: 1
From: Worksop
Fiesta Lambda Sensor
I foolishly cut off my Lambda sensor when I stripped my car, and need to re-instate it, where does the wiring run from, as I'm not sure where to start looking.
Car is a 2000 Mk5 Fiesta.
Alternatively would it be advisable to take the opportunity to install a wideband lambda sensor? The basic spec is cammed 1600 Zetec SE on ITB's and the caving to around 8k with an Omex 600 ecu.
Could I run a wideband with the ecu, or would I still need the standard sensor?
Car is a 2000 Mk5 Fiesta.
Alternatively would it be advisable to take the opportunity to install a wideband lambda sensor? The basic spec is cammed 1600 Zetec SE on ITB's and the caving to around 8k with an Omex 600 ecu.
Could I run a wideband with the ecu, or would I still need the standard sensor?
I've found that life I needed.. It's HERE!!
Joined: Jan 2008
Posts: 1,134
Likes: 25
From: Netherlands
A quick search wih Google gave me the following:
http://www.locostbuilders.co.uk/phot...iring_EDIS.jpg
http://omextechnology.co.uk/600%20EC...ual%202v01.pdf
http://www.locostbuilders.co.uk/phot...iring_EDIS.jpg
http://omextechnology.co.uk/600%20EC...ual%202v01.pdf
Thread
Thread Starter
Forum
Replies
Last Post
