sapp cos non starter
Thread Starter
Joined: Jul 2006
Posts: 542
Likes: 6
From: gosport hants
sapp cos non starter
hi guys anyone have any idea were the ignition relay is located on a non lambda 4x4 sapp cos as i have no supply to the ecu [l8] when turning on the ignition also pins 1 and 19 should be earthed but show 12v when ignition on hhheeeeellllllpppppppp
Last edited by ballbag42; May 27, 2012 at 04:08 PM.
revisiting the dark side
Joined: May 2012
Posts: 2
Likes: 0
From: Gosport
Just an addition.......... does anyone have any schematics for the wiring on the ecu and engine bay wiring?
I'm fairly sure that it's an earthing issue after an engine swap...... I've read somewhere that pins 1 & 19 on the ecu should be connected to an earthing point on the block?
I'm fairly sure that it's an earthing issue after an engine swap...... I've read somewhere that pins 1 & 19 on the ecu should be connected to an earthing point on the block?
Thread
Thread Starter
Forum
Replies
Last Post