When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Can anybody help please. i've just finished putting my 2wd saff back together after fitting all new gaskets, had head skimmed etc. Got cams, crank pulley and distributer TDC. but it will not run. It turns over and sparks, fuel is coming through but will not run. Can anybody help please..
you sure you've got the dizzy timed correctly? using the lug on the pulley not the groove? and the centre of the rotor arm lined up the mark on the housing?
Yup all the injector plugs are on the right way round, and the rotor arm is center to the mark and the pointer on the distributor pulley is pointing at the distributor. But still no joy.
Might be worth doing a compression check and make sure the pick-up in the dizzy is ok ive had this problem with mine recently and it was duff also double check all wiring is correct
Thanks for all the suggestions i've tried everything but run out of time, as it is now on the trailer and i'm dropping it off to martin at reylands in the morning as it's going to be mapped. I will post up the reason for the fault when i know as it may be a help to someone in the future . Cheers Mark
There was a lug missing from the crank pulley and also an after market chip that no one new about behind the glove box was playing up. so all sorted now and picking it up tomorrow.
Can anybody help please. i've just finished putting my 2wd saff back together after fitting all new gaskets, had head skimmed etc. Got cams, crank pulley and distributer TDC. but it will not run. It turns over and sparks, fuel is coming through but will not run. Can anybody help please..
get hold of tabetha she always posting on things like this shes very good