lads, a wee problem my 2wd shappire has stated missing since put on a cone filter and 70 mm frontmount intercooler, its ok wen u feed the power in easy, but wen u floor it, it starts missing, the car runs geens with the standard t3, dnt think theres a uprated chip in it and a two bar map senor also. any ideas???????

 

Close plug gap up a bit more

 

new plugs fitted 1 month ago, motorcraft ones, were fine before parts were fitted, how much should i close them by????????

 

Bout 5 tho breathing better so boosting faster jus blows spark out had problem before

 

thanks lad will try this at the weekend,

 

what boost was it set at before and after(as sure it would of changed mate) I'd go get it set up now! also you say it's running (greens 803's or 355's???) without an uprated chip/map sensor??? are you sure?

 

Missing is sorted closed cap on plugs, fine now , car is boosting to 22 psi, pulls well,
Checked the chip today, has a superchip fitted! It has wrote on the top of the chip in pen ( sap 2wd p1 STD) also has printed on it the numbers 27999,,, theres a code on the casing of the brain weber Iaw , Italy 045, W45.06/lL20-67, wot does all this mean?? Also checked the injectors there greens, also a code on them 0280150355, i take it that the last 3 digets mean that I have 355's, map sensor is black think that is a two bar 1???

 

Is my car is running stage 1? Wot bhp would it b??

 

I'd say around 280-300 ish

 

cheers lad

 

Should I fit a 3 bar map sensor now? Or maybe buy one and keep it till I maybe upgrade to stage 3, do I need to upgrade the ecu as well, sort off all new to this!

 

fuck you have nt a clue you homo
need to learn how to drive a stage 1 before you go to stage 3 pmsl

 

lad ur a twat, wen ever u get urs built again ill show how to drive it not like u, u ole woman