Recharge time using Duratec COP's
#1
Virgin
Thread Starter
Join Date: Sep 2010
Location: Finland
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
Recharge time using Duratec COP's
I just had a coil failure last saturday with my Zetec SE race engine.
I use the Duratec's direct ignition coil on plug coils with the Tatech aftermarcet ECU.
The coils have proven reliable in road cars so I suspect I have something a bit off with my set up. I predict I'll end up with another dead coil unless I react somehow.
I have a 4 millilsecond recharge time at my ECU and thought I could use a little shorter recharge / Dwell time. But would like to know what other people have had as the dwell time?
I use the Duratec's direct ignition coil on plug coils with the Tatech aftermarcet ECU.
The coils have proven reliable in road cars so I suspect I have something a bit off with my set up. I predict I'll end up with another dead coil unless I react somehow.
I have a 4 millilsecond recharge time at my ECU and thought I could use a little shorter recharge / Dwell time. But would like to know what other people have had as the dwell time?
Thread
Thread Starter
Forum
Replies
Last Post
Adam Graham
Restorations, Rebuilds & Projects.
7
06-09-2015 06:04 AM