I got this from a lancia dedra a while ago, thinking of using it on my 2.1 zetec turbo providing its basically an l8 and can be chipped as such.
From the pics i found it looks the same, got it with loom, all sensors, injectors, throttle body etc! So hopefully i can use it!

 

It looks similar to me, although cant remember exactly what mine looks like inside.

If you dont get any other replies, pm me tomorrow eve and i will open my L8 up and take some pictures for you !

 

Awesome, thanks

 

The Lancia and Ford units are almost the same. There are small differences in the wiring.

 

What sort of differences?

 

Ask Jano on oddkiddcreations.co.uk he might be able to help you mate

 

Lancia and Ford weber-marelli ecu's are very similar. Most of the sensors and actuators are the same and on the same pin.
Big difference from a diagnostic standpoint is that the Lancia ecu's all have a serial link, through which you can read codes and data, where the Ford unit only have a blinking led.

8V turbo
Not real boost control, but an overboost (0,1-0,2 bar) at full throttle - with an overboost light.
8V turbo cat
Check engine light
16V turbo
Check engine light + 2 map sensors - 2-bar and 3-bar
16V turbo cat
Check engine Light + Wasted spark

 

So I should be able to have it chipped by the usual cossie tuners then? It was from an 8v I think.

 

I'll see if he can help, thanks

 

It looks like an L8, Fiat along with others as said used exactly the same management system being it's Italian anyway, the turbo Dedra even has a Garrett T3. Obviously the software is different but apart from that I think there the same.

Martin

 

Once a pectel board is fitted the software will be the same and enable tuning. I have a Lancia delta ECU on one of my customers cars that i bought from Sardina on a holiday i took some time out to visit a breakers yard.

 

Awesome news, i`ll be in touch regarding the phase sensor fittings.