solid flywheel conv
#1
Virgin
Thread Starter
Join Date: Mar 2010
Location: bolton
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
![Unhappy](https://passionford.com/forum/images/icons/icon9.gif)
hi all
first off i like to say hi this is my first post
. well here gose i have just got a mondeo tdci on 53 plate the dual mass was nocking i didnt no this at first. silly me i know.so i have had a solid flywheel kit fitted Valeo and cylinder. well picked it thursday all was ok went to work thursday night 34 mil trip down motorway when pulling in to yard clutch started giveing loud click when changing gear so i turnd radio off and put it in first gear set off slowly and clutch made a noise like flywheel was loss so kept going went in to second gear and it clicked again so kept going to third gear and clicked again.so i went back on to raod and had long drive it sounds like my car is farting and wen coming to a stop its noisey as hell. so i took it back today he took it for test drive and says its gear box chater. so is this true are am i being fobbed off i feel like i should of stayed with the noisy dual mass flywheel. i do have 2 years warranty with it. please help me poeples.![Wall](https://passionford.com/forum/images/smilies/wall.gif)
wozz
first off i like to say hi this is my first post
![Top](https://passionford.com/forum/images/smilies/smile011.gif)
![Wall](https://passionford.com/forum/images/smilies/wall.gif)
wozz
#4
PassionFord Regular
![Default](https://passionford.com/forum/images/icons/icon1.gif)
Sounds like you better get over to www.fordmondeo.org and get surfing through the forums there , loads of info on the mondeo , mostly bad tho lol
Should of stock to the dual mass i think .
Should of stock to the dual mass i think .
Last edited by steanlol; 10-03-2010 at 12:18 PM.
Trending Topics
#8
Virgin
Thread Starter
Join Date: Mar 2010
Location: bolton
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://passionford.com/forum/images/icons/icon1.gif)
hi all
well i have rang them back today told them i have been to two different garages and said that there should be no noise in the box he said bring it back on monday and they will have a look at it. great stuff i thought they rang me back about 45 min later and said if i take my car to a different garage and get them to fit a clutch and take the one they take out back and they will give me a full refund.so going to one in preston on friday and letting him have a listen to see what it is. cos it was not there till i had clutch done. how can you tell if gear box has oil in it??
wozza
well i have rang them back today told them i have been to two different garages and said that there should be no noise in the box he said bring it back on monday and they will have a look at it. great stuff i thought they rang me back about 45 min later and said if i take my car to a different garage and get them to fit a clutch and take the one they take out back and they will give me a full refund.so going to one in preston on friday and letting him have a listen to see what it is. cos it was not there till i had clutch done. how can you tell if gear box has oil in it??
wozza
#11
competant bodger
iTrader: (2)
![Default](https://passionford.com/forum/images/icons/icon1.gif)
did they change the slave cylinder as well? there is a faulty batch of these kicking about at the mo changed 2 recently well 4 actually because they both only lasted a few days they start clicking then burst and piss all the clutch fluid out replaced them both with valeo ones and so far no problems touchwood!
Thread
Thread Starter
Forum
Replies
Last Post
SMILER258
Restorations, Rebuilds & Projects.
36
28-09-2015 09:04 AM