Hi,

Is this the stuff to seal the half moon seals on a Cosworth??

HYLOMAR PL32M

Thanks in advance

 

That's what I use. Not had a leak yet.

 

It will work, but if you buy Loctite 5900 or 5910, you'll never look at Hyloamr again, and be able to use it on a lot more things, glass wood plastic fibreglass carbon ceramic metal bricks etc etc.
tabetha

 

Cheers guys

@ tabetha can i also use this loctite instead of epoxy to ''glue'' the pipe for the breather in the camcover, i've read the specs of it and i think it will work???

 

Yes will do the job perfectly, but you will have a fight on your hands if you ever want to take it out again!!
I have bookshelf supports held on with this stuff, with 3 model cars 1/10 lecky ones plus controllers on it plus spares etc, radio papers other odds and sods!!
tabetha

 

How long does it take for the Loctite to harden to full strenght??

 

I used this stuff and it worked a treat. You can buy it at any A1 motor store. http://www.motoressentials.co.uk/epa...oducts/rtv-red

 

If you use the quick setting one(5910) then about 10 minutes, the other around 1 hour(5900).
There is a reason why this stuff is expensive, a tube of around 300ml is somewhere in the region of £18-£22.
tabetha

 

is that the one tabs?!

http://www.halfords.com/webapp/wcs/s...egoryId_165691

if it is thats what u reccomended that u used on the bolt i fitted to the back of the blocks!! think with my trade card was about £3 odd for a 80ml tube in halfords!

 

i use locctite 5910 never fails. evan use it instead of theromasat and water pump gasket. no leaks!

 

Thanks for the comments, just ordered some Loctite at my work yestreday

 

Yes that's the stuff, my local halfords doesn't sell it, looked at my tube today, it is 1500ml, god knows where I got 300 from!!
tabetha

 

Got mine today, only €13,02 for 200ml

 

Also sold on ebay if you carnt find any local to you

http://cgi.ebay.co.uk/Loctite-5910-H...item19b99a4ea1