bumped for brakes??
I've found that life I needed.. It's HERE!!
Joined: Oct 2005
Posts: 1,453
Likes: 30
From: Perth Western Australia
How much were they, and what size discs are they for. also what jag are they off. I have seen similar ones for sale on ebay in america.
thanks.
TONY
thanks.
TONY
Trending Topics
Quite right not to file them(4mm), as you have found out they won't for a cossie or rst disc as these are 24mm wide.
So ideally you need a disc from a ford that is vented and 20mm wide, going to seriously struggle with this.
Some can be seriously tight when new getting things squeezed in, I have often had to just skim a tiny amount of the pad away, where it was a bit "hairy" being new.
Your best bet is to see what the calipers are like on the car ie would the disc fall in the centre without the pads, if it does, then you can just get a local engineering firm to make some wider spacers for the caliper halves, but if also needing to space these outward due to diameter would be better off selling.
tabetha
So ideally you need a disc from a ford that is vented and 20mm wide, going to seriously struggle with this.
Some can be seriously tight when new getting things squeezed in, I have often had to just skim a tiny amount of the pad away, where it was a bit "hairy" being new.
Your best bet is to see what the calipers are like on the car ie would the disc fall in the centre without the pads, if it does, then you can just get a local engineering firm to make some wider spacers for the caliper halves, but if also needing to space these outward due to diameter would be better off selling.
tabetha
Thread
Thread Starter
Forum
Replies
Last Post




