engine earth saph 4x4
#1
Regular Contributor
Thread Starter
iTrader: (3)
Join Date: Nov 2009
Location: norfolk
Posts: 231
Likes: 0
Received 0 Likes
on
0 Posts
engine earth saph 4x4
my car wont start because the engine has no earth(starter wont crank),if i use jump lead from battery negative pole to engine lifting eye,it starts.
where is the earth located?
i have followed the earth from the negative pole of the battery to the crossmember/engine mount and that is o.k but it stops there,so my guess is it has a seperate earth for the engine,question is,where does it start and end?
cheers jim.
where is the earth located?
i have followed the earth from the negative pole of the battery to the crossmember/engine mount and that is o.k but it stops there,so my guess is it has a seperate earth for the engine,question is,where does it start and end?
cheers jim.
#2
The major thick battery earth should be bolted down onto a bell housing bolt, make sure this is very good as if it isn't it can search for earth through the ecu earth points on the plenum cover and fry the ecu.
The other much smaller earth goes onto the little bracket on the edge of the battery tray.
tabetha
The other much smaller earth goes onto the little bracket on the edge of the battery tray.
tabetha
Thread
Thread Starter
Forum
Replies
Last Post
big_Rad
General Car Related Discussion.
8
15-09-2017 09:36 AM