Anyone know the figures for the standard injectors on the ST170?

I need the impedance and flow rate to set up my EFi conversion...

 

Full part number from the injector ?
tabetha

 

Thanks Tabatha, sorry for the delay..
Number on the side is..

0 280 156 095

Thanks,
Steve

 

My listing jumps from 071 to 100, so 095 not there.
I would phone Bosch technical on 01895 834466 to get info.
tabetha

 

0280156095 315cc 14.5Ohms

there you go

 

Cheers!

 

Has anyone got a set of these injectors for sale
or would consider a swap with a new set of blacktop injectors 0280155820

Regards
Rob

robswesty7@sky.com

 

Are these the same as focus rs? Ive seen a set on eBay which say for 2.0 including rs.

I'm lookin for a set which will cope with 200-220bhp on 1.8 zetec turbo.

 

Just found this table if it's any use - seems to list pretty much all Bosch injectors...

http://www.polog40.co.uk/article_injector_table.php

According to that table, the Focus/Mondeo 2.0 white (0280155820) injectors have a 200CC/min flow rate. That is about adequate for a 150 BHP 2.0 but definitely not a Zetec Turbo. That guy on ebay is wrong to state that Ford also fitted them to the Focus RS - I'm certain that it would use at least 300CC/Min items (especially if the ST170 did - I wouldn't be surprised if they shared the same injectors instead).