When fitting a bailey breather kit onto a 4x4 cos does it connect onto the standard oil seperator (black metal box under manifold)or does the new system do away with it?

Has anyone got a diagram on where all the pipe work goes to.

Roy.

 

Yeah, your meant to slide in 1 of the alloy pipes but its a proper tight fit so we ended up using the standard ford rubber elbow, putting the pipe into that, then the elbow back on the metal box type thing, brings the pipe out up the back but makes no difference.
If you've got July 2002 FastFord, there is an article on how its all done.

 

if anyone has this scanned i would also much appreciate it

 

Will av ago at scanning it later, am not that good with these things tho!

 

would be v thankfull - - looking at the job - it looks as if breathering ftom both sides of the block is the better way to go rather than breathing from one side and the rocker box - before i pull it all to bits though im gonna make sure i have all the bits, pipes and clips ands stuff.

cheers, dave.

 

Minr breathers both sides and rocker top!

 

so does the big vent to atmosphere and the small oil return go to where the oil return went in place if the std ford oil seperator oil return?

 

Dint get that m8
Big un under tank breathes to atmostphere, little un underneath breathes/drains to sump, 1 of the top uns goes to rocker, other top un goes to original breather point under inlet manifold.

 

scans came though - and show where it all means - cheers mate

 

Can you mail me a copy,need to see pics

 

pm me your email addrss and ill send them now

 

Sent you a pm Dave

 

im at home at the moment - will send them monday morning from work

 

ladies and gents - you should have recieved them today

if anyone else wants a copy - pm me

cheers to Milko for the scans

 

Thank you very much for them mails m8.

 

Would also love a copy Dave

John.g.bennett@btinternet.com

 

SENT

 

Can you mail me also a copy

nadia.nulens@pandora.be

 

sent, and sent