Mondeo tdci running problem
#1
Regular Contributor
Thread Starter
Join Date: Jul 2004
Posts: 218
Likes: 0
Received 0 Likes
on
0 Posts
Mondeo tdci running problem
hi guys just wondered if any one could shed some light on a problem for me...
have a problem with my mondeo tdci. about 50 miles after being serviced the glow plug light starting flashing then went off. about a week or later it did this again but this time lost power. mate come round and plugged computer into it and it came up with number 3 cyclindre above knock threshold.it ran like a bag of spanners and smoked like hell.next morning it wouldnt even start. after having the injectors re coded (in cyclinder order) it starts and runs fine but there seems to be a slight knock from about 2500-3500rpm. any ideas. it also seems to pull like a train now...
cheers
have a problem with my mondeo tdci. about 50 miles after being serviced the glow plug light starting flashing then went off. about a week or later it did this again but this time lost power. mate come round and plugged computer into it and it came up with number 3 cyclindre above knock threshold.it ran like a bag of spanners and smoked like hell.next morning it wouldnt even start. after having the injectors re coded (in cyclinder order) it starts and runs fine but there seems to be a slight knock from about 2500-3500rpm. any ideas. it also seems to pull like a train now...
cheers
#4
r sparks
iTrader: (1)
Join Date: Aug 2007
Location: shrewsbury
Posts: 49
Likes: 0
Received 0 Likes
on
0 Posts
injectors m8 you can only re-code them once if the problem comes again it needs the offending injector replaced, also check the fuel filter is not leaking, im a ford tech, have this alot with them, google united diesels in shropshire get some diesel aid off him absolutely fantastic stuff increases perfomance, removes water from fuel etc
Thread
Thread Starter
Forum
Replies
Last Post
vdun01
Ford Fiesta
7
05-10-2017 08:14 AM
kyle_st200
Ford Focus Diesel
5
21-08-2015 09:28 PM