I have a xr3i mk4 gearbox which i want to put a lsd form a rs turbo in. I already have the lsd but not sure how to go about fitting it. I have built engines but never touched a gearbox. Has anybody got any information on how to do this with torque setting if possible. is it a fairly straight forward convertion?

cheers.

 

Have a look in the resto section mate at coswurv's thread on his cossie engined escort hes got abit of info on there that will point you in the right direction

mark

 

think u have to remove 5th gear mate to fit it

 

You have to remove everything not just the 5th gear have a look on here
https://passionford.com/forum/restor...04-09-a-9.html
near the bottom of the page its not as detailed as i first thought but it'll give you an idea of whats involved.

mark.

 

You have to pretty much fully strip the box, removing in and output shafts, all the gears etc, there is a guide somewhere on the internet, ill try and find it for you.

 

http://www.escortupgrades.co.uk/Esco...on%20Index.htm

Have a gander there mate, full of information for you.