proboscus

i have fitted a 10mm plenum spacer to my 4x4 sapph.when refitting the fuel rail i have bolted it to the rear of the lugs on the cover that it originally bolted to as if i had put it back as it was originally it would not reach the injector heads.was i correct in doing this or is there another way of refitting the fuel rail.

Simmo

iTrader: (20)

The 15mm spacer can sit on the other side of the lug fine... but the 10mm spacers normally require the lugs to be cut/ground back so the injectors sit at the correct angle...