i am wanting to get my sapph to as near to 400 brake as possible i take it a stage 3 chip will do this but is there a better chip to do this and any idea of cost

 

chips are written as per your spec; you dont just buy a chip and it will give you 400bhp, your spec determines what power you run

there are better chips than others; but that depends on who has written the chip/ map

i run an MSD chip, and i cannot fault it

speak to stu at MSD http://www.motorsport-developments.co.uk/

depending on what your spec is, i expect he'll have a off the shelf chip

what is your spec in trying to achieve 400bhp?

 

t34.63 -34 actuator greys 73mm throttle body and 10mm penum spacer

 

My car with same spec made 376bhp and 380ft-lb of torque with a msd chip.

mark