plenum spacer!!! plz help!!!
#1
plenum spacer!!! plz help!!!
hiya ive just bought a 10mm plenum spacer for my sapphire cosworth, fited it now gone to put the injectors in and the rail does like up atall it and the injectors wont fit, also the bottom bolt on the plenum to the engine mount doesn't line up either this is a nightmare!!! someone must have had this problem. any help would be great. cheers
#2
PassionFords Creator
iTrader: (12)
Joined: May 2003
Posts: 28,824
Likes: 95
From: Blackpool, UK Destination: Rev limiter
hiya ive just bought a 10mm plenum spacer for my sapphire cosworth, fited it now gone to put the injectors in and the rail does like up atall it and the injectors wont fit, also the bottom bolt on the plenum to the engine mount doesn't line up either this is a nightmare!!! someone must have had this problem. any help would be great. cheers
#4
Try Ferriday.... 14, 15 or 16mm spacers are the sizes that will work with a standard plenum.
http://www.ferriday.co.uk/orders/man...adaptors.shtml
Not sure on what thickness they are but a quick phone call will soon get you that information.
http://www.ferriday.co.uk/orders/man...adaptors.shtml
Not sure on what thickness they are but a quick phone call will soon get you that information.
#6
Ive got a 10mm one on mine you just have to file 4mm off the back of the mounting stub it doesnt stop you putting it back to standard. As for the mount its the same with them all you just have to slot the holes if you go for the 14mm one it would be worse on the mount.
IAN
IAN
Thread
Thread Starter
Forum
Replies
Last Post
timsrs
Ford Sierra/Sapphire/RS500 Cosworth
22
24-09-2015 08:14 PM