Escort Cosworth Throttle Position Sensor
Thread Starter
Gods Country
Joined: Apr 2006
Posts: 58
Likes: 0
From: Bridgend
Escort Cosworth Throttle Position Sensor
Does anyone know how to test one of the ( not the red type ). Relative resistances or voltages to pins and throttle position would be great.
Many thanks.
Many thanks.
PassionFord Post Whore!!
Joined: Sep 2003
Posts: 4,519
Likes: 1
From: Macclesfield - you'll never leave....!
with it on the car, or in your hand, the PF09 type - ignore the colour as there are red and black versions of the same model, PF01 = 2wd , PF09 = 4x4.
if its connected to the car and plugged into the loom with the ignition on, check back at the ecu with the cover off the multiplug at pins 11 and 17. at idel you should get between 0.25 VDC and 0.3 VDC - this incidently is where the sensor is exactly half way along its sloted ajustment holes. the voltage should increase to just under 5 vdc when the throttle is wide open.
if its connected to the car and plugged into the loom with the ignition on, check back at the ecu with the cover off the multiplug at pins 11 and 17. at idel you should get between 0.25 VDC and 0.3 VDC - this incidently is where the sensor is exactly half way along its sloted ajustment holes. the voltage should increase to just under 5 vdc when the throttle is wide open.
Thread
Thread Starter
Forum
Replies
Last Post
