Whats the retail on new C20 LET pistons??
#1
PassionFord Regular
Thread Starter
![Default](https://passionford.com/forum/images/icons/icon1.gif)
As above, looking to see what the retail for a set of Calibra Turbo pistons are, if anyone has recently purchased any??
And also, they come in varying size, i know its 86mm for using with a zetec engine but they come in 4 dif sizes, 85.?? to 86.00 / 86.?? to 86.85 etc....
Any help much appreciated
Cheers
And also, they come in varying size, i know its 86mm for using with a zetec engine but they come in 4 dif sizes, 85.?? to 86.00 / 86.?? to 86.85 etc....
Any help much appreciated
Cheers
#3
Anybody for a brew?
![Default](https://passionford.com/forum/images/icons/icon1.gif)
£156 thats for std 85.95mm to suit the std 86mm bore. Includes pins and rings. I got a price from local vauxhall dealers as i wandered too.
At 600 a set its cheeper to go for after market ones.
Wossner ones retail at about 500 a set. and these can be had in verious bore size so you can still go 2.1
At 600 a set its cheeper to go for after market ones.
Wossner ones retail at about 500 a set. and these can be had in verious bore size so you can still go 2.1
Last edited by JamesR1; 18-03-2008 at 12:05 AM.
#5
*** Sierra RS Custard ***
iTrader: (3)
![Default](https://passionford.com/forum/images/icons/icon1.gif)
Chris Astley does genuine Mahle in 86.0 / 86.5mm for 425 quid a set delivered.
01257 262 565
They arent listed on his website, but just say Chip mentioned them if he asks where you got the price from.
If he hasnt got any then my other mate Steve does them for around 450 and will definately have stock, he is on here as "steveboyslim" if you want to drop him a PM, he'll also machine them for a different CR if you wish, although obviously there is an additional charge, not a lot though normally.
01257 262 565
They arent listed on his website, but just say Chip mentioned them if he asks where you got the price from.
If he hasnt got any then my other mate Steve does them for around 450 and will definately have stock, he is on here as "steveboyslim" if you want to drop him a PM, he'll also machine them for a different CR if you wish, although obviously there is an additional charge, not a lot though normally.
Last edited by Chip; 18-03-2008 at 12:52 AM.
#6
I've found that life I needed.. It's HERE!!
iTrader: (3)
Join Date: Oct 2007
Location: Kent
Posts: 1,459
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://passionford.com/forum/images/icons/icon1.gif)
Get On Ebay.com You'll Get A Set Of Proper Zetec Forged Pistons And Steel Rods For Around £400 Get Them To Send As A Gift Then You Won't Get Stung By The Vat Man.
Thread
Thread Starter
Forum
Replies
Last Post
deathrider666
Technical help Q & A
3
28-09-2015 06:12 PM