cossie loom
23-02-2008, 05:14 PM
#1
Regular Contributor
Thread Starter
Join Date: Apr 2005
Location: south london
Posts: 250
Likes: 0
Received 0 Likes
on
0 Posts
cossie loom
neer the ecu plug there are two small plugs
one with 5 connectins on it (2 not used)
and one with three connections on it (two black wires and a brown)whot is this for
and why would some one connect the brown with one of the blacks together
one with 5 connectins on it (2 not used)
and one with three connections on it (two black wires and a brown)whot is this for
and why would some one connect the brown with one of the blacks together
23-02-2008, 05:51 PM
#2
Regular Contributor
Thread Starter
Join Date: Apr 2005
Location: south london
Posts: 250
Likes: 0
Received 0 Likes
on
0 Posts
i now have the two looms in front of me with a wireing diagram
and one 2wd loom has a purple plug for a relay that isnt used
and the outher loom dosent
and one 2wd loom has a purple plug for a relay that isnt used
and the outher loom dosent
23-02-2008, 07:14 PM
#3
PassionFord Regular
Join Date: Aug 2003
Location: dublin, ireland
Posts: 417
Likes: 0
Received 0 Likes
on
0 Posts
the one with the five holes is a diagnostic port.it gives error codes in the form of flashing led on a unit that plugs in to it
the other is an ignition timming adjustment, by bridging the brown wire with one or both of the black wires retards the ignition by set amounts.
someone could have done this to stop pinking with crap fuel
the other is an ignition timming adjustment, by bridging the brown wire with one or both of the black wires retards the ignition by set amounts.
someone could have done this to stop pinking with crap fuel
Thread
Thread Starter
Forum
Replies
Last Post
muz
General Car Related Discussion.
7
30-09-2015 08:29 AM
Russ Payne
Ford Sierra/Sapphire/RS500 Cosworth
1
25-09-2015 08:29 PM