Hi...just want to ask what sort of clutch you are running on your Cossies...?

I currently run a AP 6 paddle with std cover and bearing....its as light as a std witch is fine, but I dont like the feel as its difficult when starting from standstil...there is a lot of "judder" at first...but when going it seems fine....SO I have decided to try and find a better one...hopefully

Car is a 2wd Sapp. Cosworth running siemens 55', T-34, MSD chip and so on....


please advice.....

 

i am running a alcon 6 paddle with a heavy duty cover with roughly the same spec seems ok to me slight judder but not that bad!did u have to flywheel skimmed?

 

IF it's juddering with that set up then there IS other issues going on, I know plenty of Cossie's running that and ALL are fine!

as said was the fly wheel re-faced as this could be the problem!

 

Hi...no it was not refaced,...as it was brand new from a Ford Dealer so I did not think that I needed it .....???

Any chance that the company who put the engine/clutch together, could have done it wrong ?

what else could be a problem..?

 

i am having the same problem here...

 

if it was a brand new fly wheel there shouldn't be a problem there, did they check/change the spiggot bearing??

I've known of a couple of 2 w/d's that the 4x bolts that hold the bell hsing to the box to be lose and that has caused a slight judder/vibration!

regarding the garage fitting it wrong cant see it tbh!

try another cable 1st as that's the cheapest option!

 

I have the same set up and its fine.

ALL paddle clutches will judder due to the paddles and the way they grip the flywheel.

You can really slip a paddle clutch so its something that you need to get used to.

 

Hmmm....so if I dont want get used to it ...I'll need a organic clutch right..??

So anyone want to recommend a god organic clutch kit to use ??

 

mine on ebay........finishing soon, I'll end early for a good offer!

http://cgi.ebay.co.uk/ws/eBayISAPI.d...MESE:IT&ih=013

Cheers
Dan

 

I am also looking for a 6-paddle clutchplate and std cover myself.....so could do a p/x if your clutchplate is still in good condition.

Cheers
Dan

 

sounds interesting...I'll put a pic of it here in a sec.

 

cheers

 

Hi..here is some pic's.......I dont know much about clutches....but it looks ok to me ... I do not have pics of the cover, but can get some if you want ??

please let me know if interested...otherwise please pm me how much you will sell it for

 

how many miles ahve you done on the clutch?

Cheers
dan

 

well a bit more than yours...I think around 7-8000km....approx 5000 of them was running in my new engine....the rest has been to and from job and 4 shows...??

 

pm sent

 

PM back...