Warning Light after changing ignition coil.
#1
Warning Light after changing ignition coil.
Hi all,
My wifes fusion, 1.4 03 reg stated to misfire at low revs. so i changed the plugs and the coil and this cured the problem. But the engine management light has stayed on and i dont know if this needs to be reset or if a different problem remains. Is there a way to clear this light myself or does it need to go to an expensive 'expert' ?
Cheers
Steve.
My wifes fusion, 1.4 03 reg stated to misfire at low revs. so i changed the plugs and the coil and this cured the problem. But the engine management light has stayed on and i dont know if this needs to be reset or if a different problem remains. Is there a way to clear this light myself or does it need to go to an expensive 'expert' ?
Cheers
Steve.
#2
Glennvestite
iTrader: (1)
Join Date: Jul 2006
Location: Darlington county durham
Posts: 62,764
Received 1,044 Likes
on
998 Posts
Try and take the car to a back street garage . Alot of these garages have the scanners which can be plugged in to check the fault. No doubt the light hq only on cause of the old faulty coil.
Thread
Thread Starter
Forum
Replies
Last Post