KSA-Cossie

iTrader: (4)

Every time i try to lock it it just locks then unlocks , any ideas troops ??

JamesH

iTrader: (21)

Do you know which door is doing it?

If you can hear the motor(s) trying then it is likely that the door locking mechanism or the barrel is a bit dry

Try: Syraying shit loads of WD40 into the door barrels and all locks (in the door shut) and report back

KSA-Cossie

iTrader: (4)

It's doing it with both doors

JamesH

iTrader: (21)

Not with the rear doors then?

CosKev3

Pain in ass central locking

Could be the metal wires that go from the door handle to the lock/barrel are tight/need greasing,take the door cards off and use spray grease on everything that moves relating to the locking

Could be the wires have broken down in the grommet where they pass from pillar to door,this is what had happened to mine

The electrics are a funny set up on the central locking,can't for the life of me remember how it is though

Think the wires that go to the central locking motor change from an earth to a live,so this either holds the lock closed,or open IIRC

Took me ages to sort mine with the test lamp and a couple of pieces of wire,one to earth the other to the positive on the battery

KSA-Cossie

iTrader: (4)

Just thought,the door cards were off as the front end had a freshen up paintwise and the locks were taken out i wonder if something just needs tightening back up. Thanks for the replies.