lambada sensor 2wd sapphire
Thread Starter
Too many posts.. I need a life!!
iTrader: (1)
Joined: Nov 2005
Posts: 695
Likes: 1
From: Derry N Ireland
lambada sensor 2wd sapphire
can anyone help i have bosch lambada sensor 2wd sapphire
can anyone the wether the white or black wire on the lambada probe goes to pin 2 on the ecu
had to seperate mine to cut hole in turbo heat shield and have mixed two wires up
help asap
regards
eugene
can anyone the wether the white or black wire on the lambada probe goes to pin 2 on the ecu
had to seperate mine to cut hole in turbo heat shield and have mixed two wires up
help asap
regards
eugene
20K+ Super Poster.
Joined: Jul 2006
Posts: 24,596
Likes: 4
From: uk
Black is ALWAYS signal,
White is earth on two wire, but on 3 or 4 wire one white is earth one is live for heater.
This is for ZIRCONIA sensors.
On TITANIA sensors black is signal, white is negative(earth) on three wire or on four wire, white is REFFERENCE, ie live from ecu, not TO IT.
tabetha
White is earth on two wire, but on 3 or 4 wire one white is earth one is live for heater.
This is for ZIRCONIA sensors.
On TITANIA sensors black is signal, white is negative(earth) on three wire or on four wire, white is REFFERENCE, ie live from ecu, not TO IT.
tabetha
Thread
Thread Starter
Forum
Replies
Last Post
Dr. Ickxs
Ford Escort RS Turbo
2
Sep 15, 2015 10:15 PM
mike elsome
Ford Sierra/Sapphire/RS500 Cosworth
3
Sep 14, 2015 04:08 PM