drivin around in my 2wd cos and missed a gear and went in to first by accident,it reved like a bitch now the car mis fires on cylinder 3, i checked the cams and injectors and timing, replaced the dizzy rota arm,spark plugs tryed the leads what could this be anyone, thanks

 

could of bent a valve or two possibly, get a compression test done and go from there!

 

did a compression test 1 had 150psi 2 had 150psi 3 had nothink 4 had 50psi valves dont look bent, or can i not tell if bent till i take them out

 

Bent valves in 3. Head off and strip down time.

 

from the signs I'D say the valves have clipped hard on the piston in number 3 and they are NOT seating properly so head off for further inspection