iv fitted a flamer kit 2 my s2 but im finding it realy hard 2 get flames.i was thinking bout wireing up a the cold start injector 2 a switch on the dash so i can flick it on to richen up the fuel and produce more flames.any one know if this would work or is it dangerous.

 

Compromising your engines performance and reliability for some flames

Not worth it IMO

 

I had one on my old s2,best to boot it then when on the over run give it a tiny bit throttle and you'll soon get flames

 

how will it affect the performance or reliability?

 

Also whats your co set at m8 ?

 

If your using the cold start injector to bung fuel through the cylinders then its guna be running rich as fuck!

Not adviseable

 

Exactly what i used to do, works every time, especially when exhaust is HOT

Bri.

 

duno what the co is set at have not had it set up yet.

 

couldnt you wire your car up so that you have a coil in the boot with a plug in the exhaust. but will cut the front coil and switch to the back coil. so that when you rev it hard and press the switch all the fuel will pass throw the engine???
adam