i cant seem to get a spark from my car so im just going to wire up the bare neccesitys to get it sparking, if i did this would it work? or do i need anything else including in it? I dont mid about fuel at the min because that all works fine, i just want to get it to spark.

if i do it like this and it still doesnt spark then does this mean my dizzy or ecu has gone?

 

Sounds like you've done it the hard way, if you strip out RS Turbo management wiring theres only about 7 wires to connect up in total!

 

which 7 wires would they be, i havent stripped the management out yet but will do this week so i can get it sparking...

 

Aren't you the one that was pm'ing me about your dizzy?

 

yeah thats me. im really strugling to get my car running, i cant fidure out what the problem is?????

 

Have you identified for definate yet if the pump runs when you crank the engine over?

 

it was hard to hear if the pump was working as my engine is loud when cranking, but im 99% sure it was working, and it felt like it was pumping when i held it....

 

just out of curiosity, should the number 1 pin on my fuel pump relay be giving out ignition live when the ignition is on? i thought pin 1 was an input signal from the wire coming from the coil via the tacho.

 

When you turn the key back you should be able to hear the pump run on for a split second usually.........

You second post ill have a look at later on in the middle of some stuff atm

 

i'll have a look to see if i can here the fuel pump run for a second when i turn the key back. that would be great if you could let me know about pin 1 on the fuel pump relay.