Compression Ratio
#1
I've found that life I needed.. It's HERE!!
Thread Starter
Join Date: Jul 2005
Location: UK
Posts: 1,169
Likes: 0
Received 0 Likes
on
0 Posts
Compression Ratio
Currently rebuilding a 2 litre Zetec (E). Hoping to have my block decked, and my head skimmed (as its in a million bits) to up the compression ratio.
Can anybody advised on how much can be done, plan to put larger vavles and high lift cams in too.
Rich
Can anybody advised on how much can be done, plan to put larger vavles and high lift cams in too.
Rich
#2
PassionFord Post Troll
Join Date: Jun 2003
Location: Finland
Posts: 2,866
Likes: 0
Received 0 Likes
on
0 Posts
What do you want the compression to be? Just remember that the squish distance is quite carefully designed to start with and removing material from the block can bring the pistons into contact with the head. Also keep in mind that different zetec head gaskets have very different thicknesses.
#3
I've found that life I needed.. It's HERE!!
Thread Starter
Join Date: Jul 2005
Location: UK
Posts: 1,169
Likes: 0
Received 0 Likes
on
0 Posts
11 or 12 to 1. Already got a Steel headgasket. I have checked head clearance and looks okay, just vavles Im worried about.
Imagine I`ll have to run it on premium then too
Imagine I`ll have to run it on premium then too
Thread
Thread Starter
Forum
Replies
Last Post