T4 on a rst?
I've found that life I needed.. It's HERE!!
iTrader: (1)
Joined: Jun 2003
Posts: 1,187
Likes: 0
From: oswestry - shropshire
wont bolt up to the manifault mate!
best you can do is get a hybrid t3 with cossie internals! or a special roller bearing turbo!
any luck selling anything yet?
best you can do is get a hybrid t3 with cossie internals! or a special roller bearing turbo!
any luck selling anything yet?
Joined: May 2003
Posts: 21,268
Likes: 147
From: The Dark Side of the Moon...
I have seen a T4 bolted up to a 2litre Zetec turbo, using a modified RST manifold 
You need to run such a ridiculously high compression ratio, but it should be capable of producing over 500bhp

I say no more tho
You need to run such a ridiculously high compression ratio, but it should be capable of producing over 500bhp
I say no more tho
Trending Topics
the reason i ask is because i am going to have a zetec bottom end to make it a 2.1 zvh and i want a bigger turbo. I will also be having fiesta turbo or cossie management
I've found that life I needed.. It's HERE!!
iTrader: (1)
Joined: Jun 2003
Posts: 1,187
Likes: 0
From: oswestry - shropshire
if you are getting fiesta management mate you need it custom mapped! so may as well just get custom management anyways! something like omex!
You can fit any turbo to any car. Stick a Gt40 on there if you want!
The problem you'll come into is that the compressor housing will hit the manifold so you'll need to space it out. The T34 fits straigth on just, so any larger will need spacing.
Though IMO a T34 would be more than enough for 99.99% of RST's.
The problem you'll come into is that the compressor housing will hit the manifold so you'll need to space it out. The T34 fits straigth on just, so any larger will need spacing.
Though IMO a T34 would be more than enough for 99.99% of RST's.
Thread
Thread Starter
Forum
Replies
Last Post
nicodinho
Ford Non RS / XR / ST parts for sale.
6
Oct 7, 2015 12:56 PM







