Daxcossie

ok.

Ive just fitted a Profec B boost controller for the 1st time and was wondering what settings I should use as a starting point for the following:-

Set

Gain

Start boost

Warning

Limiter

I plan on holding 28psi and also have a lower setting of 10 psi set into the controller.

Engine info:-

2WD Cosworth YB, T35 - .55, Siemens black injectors, MSD chip.

Thanks in advance for any comments.

Daxcossie

I guess that Im the only one running one of these controllers and that setup will be made by trial and error