When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
ive got a three door with a new engine t34 greens etc its been fine but all of a sudden its produced a miss fire at about 5500- 6000 has anyone got any ideas,please help! so far ive changed the plugs and checked the leads
Check the condition of the wires on the phase sensor. Unclip dizy cap and look inside. The wires perish over time and can cause mis-fires. It was the last thing i checked on my sapph after replacing plugs etc and of course this is what my mis-fire was!!!!