Will be looking to start breaking in the next couple of weeks, so if any interest in the engine/want a test drive it will be a good idea to see it running before it comes apart lol.
The car has done less than 170 road miles and most parts were new/reconned.
Shell has V5 and 11 months MOT.

Location near Swindon

Engine: was mapped at Enhanced performance and made 397bhp/386lbft but had more to go!


Custom Swedish style inlet plenum to fit the rollers £300

T3/4 Turbo £300
External wastegate £150
Hayward and Scott Custom exhaust system £500
Cone air filter £40
Zetec coil packs x2 £20 each



Pro Alloy RS500 intercooler painted black. £320
Pro Alloy radiator upside down cossie rad, so will need mounts cutting off and rewelding to fit the ‘right’ way up. Painted black £300
Pro Alloy 50L fuel cell with internal collector, including VDO fuel level sender, filler neck and locking alloy cap £800
Hard pipes silicon hoses £100

Transmission & drivetrain:

Helix 6-paddle clutch £300
driveshafts £50
3dr Cosworth front hubs £300
B&M quickshift £200


Suspension & steering:

Avo monotube coilover suspension £700
Polybush suspension top mounts £30
Carbon top mounts £70
Momo race steering wheel £40
Snap-off steering wheel hub £100 (no keys to lock)
3dr rear swing arms with polybushes £50
3dr rear ARB poly bushes and drop links £40


Wheels & tyres:

Ultralight 789 17” wheels WITH Cooper Avon tyres. Front 215/45/17 Rear 235/45/17 £900
Steel wheel nuts x16 £20

Brakes:

Goodridge braided brake lines and fittings to go throughout the car £350
Vertical Hydraulic handbrake £100



Shell:

Caged 6-point bolt-in rollcage £700
Vented bonnet with vents and aerocatches £150
Modified Saph front bumper to fit 3dr £50
Badboy grill £50
Headlights £20 each
Plastics 4 Performance polycarb rear quarter windows £100
Doors including glass, drivers has a mk6 escort lock and 2 keys, passenger delocked £80 each
3dr scuttle panel £150
3dr scuttle ends £35 each
3dr washer jets £10 (new)


Interior:

Cobra Suzuka bucket seats, including side mounts £350 each
Willans 5-point seatbelt harness pair. 1 year left for FIA approved £200 each
Flocked dashboard, cut to go round cage, has switch/gauge holes and holes cut in the top for brake reservoirs £60
Stack ST700SR £420
Stack Boost stepper motor gauge £100
Stack oil temp stepper motor guage including sump plug adaptor M14 thread £85
Stack fuel level stepper motor gauge. Back light not working for some reason £60
Stack EGT stepper motor gauge £85
Battery cutoff switch £15
Modified 3dr clock surround in carbon, with idiot lights. 80mm centre hole, and two 52mm holes £50 (will do deal if bought with gauges)
Push button starter button £20
3dr steering cowel. Some holes cracked £30
Oddesey racing gel battery £110


There will be bits I have forgotten so if there is anything else, just ask!





























i should have also pointed out that it had this happen, hence breaking.

 

Shame to break it
But shouldnt have any trouble breaking it good luck

Ps do the rear calipers incorporate handbrake?

 

m looking for a scuttle panel complete . so yours is £220?

 

yes mate.

 

pm bud

 

list updated

 

Now breaking

 

Interested in the head lights mate

 

Do you have a fuel pump rewire kit?

 

i made my own wiring for the fuel pump mate.

 

Shall I send the money for the fans now then mate?

Thanks
Marc

 

Let me know when the pedal box is out and I'll get some money over to you.

 

hoping to get a lot of stuff off next weekend mate

 

how much for the roof?

 

ronnie, i know i said you can have it, but i have had a fair bit of interest in the complete shell.

if that doesnt come off tho, my offer still stands!

 

no worrys mate, i'll keep an eye on here.

want the stack dash but got to sell mine first

 

How much would you sell the loom u made for?
I'm a lazy coont and can't make one

 

sorry mate thats already provisionly sold.

btt and bias pedal box still available

 

parts now off the car

Intercooler
Rad
Fuel cell
turbo - had about 1mm play in and out - £100
wastegate
hard boost pipes and some black silicon hose (samco and SFS)


anyone know how to remove windows lol, ie the rear quarters and rear screen without fucking them (polycarb)

 

What was the gearbox like m8.

Steve

 

no issues as far as i could tell mate, i never took it over 6krpm tho.

done about 170 miles on it

 

No whines or clonkes though m8

Steve

 

nope, nothing like that bud

 

Parts sold now removed from list

 

You have pm m8


Steve

 

replied bud

 

are the engine mounts sold? please ?

 

do you mean the collins performance ones, or the ones that are bolted to the actual engine?

if the latter, then they are provisionly sold mate.

 

performance ones buddy,

 

still have them mate

 

ps they are the 4x4 cosworth engine mount ie 2 bolt fixing.

£105 delivered

 

i need a set for a 1989 2wd one so they will not fit?

 

How much do you want for just the rear poly window plus P & P? Dont want the sides as its for an xr4i.

Cheers

 

got the windows out the other night and managed to crack the n/sr quarter sligtly!

£150 for the rear screen, £80 for the sides.

you could always cut the sides to fit mate. will get rid of crack then lol

 

sorry mate, no.

its still on the original cross member and they are two bolt fixing, not single like the 2wd.

 

collected rear poly windscreen today top fella good luck with clearing the rest of the parts

leon

 

Hi - new member an all so hello.

Picking up my first 3 door in a few weeks but need arch's and sideskirts..

are yours for sale? or are they flushed in together.

Cheers ,
Paul.

 

Drop me a pm when the fly wheel and map sensor is off thanks

 

got the gearbox off last night mate, so can take the clutch and fly off with the engine insitu, should have that off in a couple of days mate. ill pm you when its off

 

Do you have a 2wd steering coupling ?
The part from column to rack.